The Volkswagen Scirocco, known for its sleek design and sporty handling, offers even more potential beneath the surface. With a VCDS (VAG-COM Diagnostic System) cable and the right know-how, you can unlock hidden features and customize your Scirocco to your liking. This guide delves into various VCDS coding options specifically for the Scirocco, empowering you to personalize your driving experience.
Common VCDS Coding Tweaks for the Scirocco
VCDS coding allows access to various control modules in your Scirocco, enabling modifications to comfort, convenience, and lighting settings. Here are some popular coding adjustments:
Comfort and Convenience
- Auto Closing Sunroof and Windows: Enable automatic closure of the sunroof and windows when rain is detected by the rain-light sensor (RLS). This requires coding in the Central Electronics module (09) and the RLS sub-system.
- Comfort Turn Signals: Adjust the number of automatic blinks when lightly tapping the turn signal stalk. The default is usually three, but you can customize it to a value between one and five through the BCM Adaptation (address 9).
- Auto Release Parking Brake: Configure the electronic parking brake (EPB) to automatically release when you engage a gear and press the accelerator. This requires modification in the parking brake module (address 53). Useful for smoother starts and stop-and-go traffic. This feature is often referred to as “hill hold assist”.
- Seatbelt Chime Modifications: Adjust or disable the seatbelt warning chime through adaptations in the Instruments module (17). Exercise caution when modifying safety features.
Lighting Adjustments
- Daytime Running Lights (DRLs): Control DRL behavior, such as activating them only when the light switch is in the “Auto” position, or using fog lights as DRLs. These modifications involve coding within the Central Electronics module (09). Specific settings depend on your Scirocco’s equipment (Xenon or Halogen).
- Coming/Leaving Home Lights: Enable the “coming home” feature, which activates your headlights for a set duration after you lock and exit the vehicle. “Leaving home” functionality may require an auto light switch and sensor. These adjustments reside in the Central Electronics module (09).
- Fog Lights with High Beams: Allow your fog lights to remain on even when the high beams are activated. This modification involves coding in the Central Electronics module (09).
- Cornering Lights with Fog Lights: Enable the fog lights to illuminate the direction you’re turning at low speeds when your headlights are on. This requires coding changes within the Central Electronics module (09).
Instrument Cluster and MFA
- Alternate Speed Display: Enable a smaller digital speed display in the multi-function display (MFD) area, useful for displaying speed in a different unit (e.g., MPH in a KPH car).
- Large Digital Speed Display: Display a large digital speed readout in the MFD. You may not be able to use this feature simultaneously with the alternate speed display.
- Gauge Cluster Staging/Needle Sweep: Activate a dramatic “sweep” of the gauges to their maximum values and back upon ignition. Note: This feature may not be compatible with all Scirocco instrument clusters. Check your cluster part number for compatibility.
- Refueling to Empty: Display the estimated amount of fuel needed to fill the tank after consuming a certain amount (e.g., 10 liters). This modification is found in the Instruments module (17) using UDS Adaptation.
Important Considerations
Before making any coding changes, it’s crucial to:
- Back up your existing coding: This allows you to revert to the original settings if necessary.
- Research thoroughly: Understand the implications of each coding change before implementing it.
- Proceed with caution: Incorrect coding can lead to malfunctions or errors.
This guide provides a starting point for exploring the world of VCDS coding on your Scirocco. Remember to consult reputable online forums and resources dedicated to VW/Audi coding for detailed instructions and support. Enjoy customizing your Scirocco!
