The Universal Obdii T-Harness Kit model HRN-GS16K22-A is an essential accessory for your Geotab GO tracking device. This multi-connector kit is specifically designed to enhance the installation and functionality of your Geotab device across a wide range of light-duty and medium-duty vehicles globally. It comes with a T-harness and twelve versatile mounting adapters, ensuring compatibility with diverse vehicle makes and models.
Why Use a Universal OBDII T-Harness Kit?
This universal obdii T-harness kit serves several critical purposes:
- Extends Device Placement: It allows for flexible placement of the Geotab GO device, moving it away from the immediate OBDII port location. This is particularly useful when the factory port is in an inconvenient location.
- Driver Accessibility: By relocating the GO device, the harness ensures it doesn’t obstruct the driver’s legroom or interfere with vehicle operation. This is crucial for driver comfort and safety.
- Unobstructed Diagnostic Port: The T-harness maintains open access to the vehicle’s OBDII port. This is vital for mechanics who need to connect diagnostic scanners for vehicle maintenance and repairs, without needing to disconnect the Geotab device.
- Covert Installation: A key advantage of this kit is its ability to facilitate a covert installation. Once installed using the universal obdii harness, the Geotab GO tracking device can be hidden out of sight, making it inaccessible to drivers and less visible to potential theft. This enhances security and prevents tampering.
With a length of 24 inches (60 cm), the harness provides ample flexibility for positioning the Geotab GO device in an optimal, discreet location within the vehicle.
Simple Installation Guide for Your Universal OBDII T-Harness Kit
Installing the Geotab HRN-GS16K22-A universal obdii T-Harness Kit is straightforward. Follow these steps to ensure proper setup of your fleet management tracking device:
- Locate the Diagnostic Port: Typically, the OBDII port is found beneath the dashboard on the driver’s side. Identify the port type – it may be secured with screws or clips. Detach any screws or unsnap the port to gain access.
- Connect the T-Harness: Attach one end of the 16-pin harness to the vehicle’s diagnostic port. Ensure a firm connection.
- Connect the Geotab GO Device: Plug the Geotab GO device into the other end of the T-harness. Upon successful connection, you will hear six beeps, and the device’s indicator lights will flash briefly.
- Secure the Device: Use a zip tie to securely fasten the Geotab GO device in place, ensuring it remains stable and does not move, which is important for data accuracy.
- Verify Installation: With the vehicle outdoors, start the ignition. Observe the Geotab GO device; LEDs will light up sequentially: Red (ignition), Green (cellular connection), and Blue (GPS). Wait until all three LEDs are illuminated.
- Final Securement: Use zip ties to neatly secure the harness and the Geotab GO device under the dashboard in a permanent, hidden location. Select the appropriate adapter plate from the kit to match the original OBDII port and secure it with screws or by snapping it into place.
By following these steps, you can effectively install your Geotab GO device using the universal obdii T-Harness kit, maximizing its benefits for vehicle tracking and fleet management. If you require further assistance or have questions about compatibility, please contact our support team for expert guidance.
