Running out of storage on your Autel diagnostic tablet? Don’t worry, it’s a common issue with a simple fix. This guide provides three effective solutions to help you remove unwanted vehicle software and reclaim valuable space on your Autel device.
Autel tablets, like the MaxiCOM MK808 and MK908P, often come pre-loaded with extensive vehicle software, consuming considerable storage space. When the tablet memory gets full, it can impact performance and prevent software updates. Fortunately, you can manage this by removing unnecessary vehicle applications.
Three Solutions to Free Up Space on Your Autel Tablet
Here are three proven methods to address insufficient storage space on your Autel diagnostic tablet:
1. Utilize an SD Card for Expanded Storage
Using an SD card is the easiest way to increase your Autel’s storage capacity. Before purchasing, check your device’s specifications to determine the maximum supported SD card size. For example, the MK808 typically supports up to 32GB, while higher-end models like the MK908P might support 128GB or even 256GB. Your Autel will usually prompt you with the recommended SD card size and format when storage is low. Remember that each vehicle application requires approximately four times its listed size plus 550MB.
2. Uninstall Unnecessary Vehicle Software
If you have an active software subscription, you can safely uninstall vehicle software you don’t frequently use. Important: If your subscription is expired, back up your device before uninstalling anything. You can reinstall the software later when your subscription is renewed.
Here’s how to uninstall vehicle apps:
Using ES File Explorer:
- Navigate to
ES File Explorer > Local > sdcard > Scan > Vehicle. - Choose your region (Europe, USA, Asia, etc.).
- Long-press the installation package of the vehicle software you want to remove.
- Select “Delete”.
Check Download Files and Data Manager:
- Repeat the process above, checking the
Downloadfolder withinES File Explorer. - Also, check the
Data Manager > Apps Uninstallsection within your Autel tablet’s settings.
3. Factory Reset (Use with Caution)
Warning: A factory reset will erase all data on your Autel tablet. Only perform this if you have a current software subscription and a recent backup. If your subscription is expired, a factory reset could result in data loss and inability to reinstall software.
To perform a factory reset:
- Go to
System Settings > Reset > Factory data reset. - Select “Erase SD card” if you want to clear the SD card as well.
- Click “Reset tablet”.
Reclaim Your Autel’s Storage
By following these methods, you can effectively remove unwanted vehicle data from your Autel diagnostic tablet. Remember to choose the solution that best fits your needs and always prioritize backing up your data before making significant changes. Freeing up space ensures your Autel tablet runs smoothly and allows for future software updates.
