The HRN-GS16K2 Universal OBDII T-Harness Kit is an essential accessory for seamless installation of your Geotab GO tracking device. Designed for versatility, this multi-connector kit includes a T-harness and twelve distinct mounting adapters, ensuring compatibility across a wide array of light-duty and medium-duty vehicles globally. Its universal design accommodates various vehicle makes and models, simplifying the deployment of Geotab’s advanced telematics solutions.
This kit primarily serves to extend the positioning of the Geotab GO device, relocating it away from the driver’s immediate space. This is particularly crucial in vehicles where the OBDII port is situated in a location that might obstruct the driver or hinder comfortable operation. Furthermore, the HRN-GS16K2 kit addresses situations where a deeply recessed OBDII port prevents a secure and proper connection with the Geotab GO device.
Beyond mere convenience, this T-harness kit maintains open access to the OBDII port. This thoughtful design allows mechanics to easily connect their engine diagnostic scanners without needing to disconnect the Geotab device, streamlining maintenance and diagnostic procedures. A significant advantage of utilizing the HRN-GS16K2 kit is the potential for covert installations. By enabling discreet placement, the Geotab GO tracking device can be effectively concealed, rendering it out of sight and inaccessible to both drivers and potential thieves, enhancing security and preventing tampering.
The HRN-GS16K2 harness measures 24 inches (60 cm) in length, providing ample flexibility for positioning the Geotab GO device in an optimal, yet discreet, location within the vehicle.
Step-by-Step Guide: Installing the HRN-GS16K2 OBDII Universal T-Harness Kit
Follow these straightforward steps for a successful installation of the HRN-GS16K2 universal OBDII T-harness kit and your Geotab GO device:
-
Locate the Diagnostic Port: Typically, the OBDII diagnostic port is found beneath the dashboard on the driver’s side of the vehicle. Identify the port type – it may be secured with screws or a snap-fit mechanism. Detach any screws or unsnap the existing port to prepare for harness connection.
-
Connect the T-Harness: Take one end of the 16-pin T-harness from your HRN-GS16K2 kit and securely connect it to the vehicle’s diagnostic port you just located and accessed.
-
Connect the Geotab GO Device: Attach the Geotab GO device to the opposite end of the T-harness. Upon successful connection, the Geotab GO device will provide auditory feedback in the form of six beeps, accompanied by a brief flash of all three indicator lights on the device.
-
Secure the Device: Utilize a zip tie to firmly secure the Geotab GO device in its position, ensuring it remains stable and does not move. This is crucial for maintaining consistent data collection and device performance.
-
Initiate and Verify Connection: Ensure the vehicle is parked in an open outdoor area to facilitate GPS satellite acquisition and adequate ventilation. Turn on the vehicle’s ignition. Observe the Geotab GO device; it will beep as each LED illuminates sequentially. Red indicates ignition detection, Green confirms cellular connectivity, and Blue signifies GPS latch. Wait until all three LEDs are steadily lit, confirming full operational status.
-
Finalize and Conceal Installation: Using zip ties, neatly secure both the harness and the Geotab GO device up under the dashboard in a permanent, out-of-sight location. It is vital to ensure the device is immobile to guarantee data integrity. Select the appropriate mounting adapter plate from the HRN-GS16K2 kit that matches the vehicle’s port type and screw or snap it securely into place, completing the HRN-GS16K2 universal OBDII T-harness kit installation.
By following these steps, you can effectively utilize the HRN-GS16K2 universal OBDII T-harness kit to enhance the installation and functionality of your Geotab GO device, ensuring optimal performance and discreet integration within a wide range of vehicles. For any uncertainties regarding vehicle connector types or harness compatibility, please consult with a GPS Tracking America specialist for expert guidance and support.
