Introduction
The C50 4G OBDII GPS tracker is a versatile device designed for a wide range of applications, from vehicle maintenance and insurance to fleet management and personal use. This device excels in OBD data collection, precise location tracking, and offers features like geofence alarms, fatigue driving alerts, and more. Understanding how to utilize its capabilities is key to maximizing its benefits. This guide serves as your manual to navigate the features and specifications of the C50 OBDII GPS tracker, ensuring you harness its full potential.
Key Features
The C50 OBDII GPS tracker is packed with features to monitor and manage your vehicle effectively:
- OBD Data Collection: Access crucial vehicle data directly from the OBDII port.
- Accurate Location Tracking: Utilize GPS technology for precise vehicle location monitoring.
- Geofence Alarm: Set virtual boundaries and receive alerts when the vehicle enters or exits designated areas.
- Fatigue Driving Setting: Promote safety by monitoring driving time and triggering fatigue alerts.
- Power Failure Alarm: Stay informed about power disruptions to the device.
- Overspeed Alarm: Receive notifications when the vehicle exceeds preset speed limits.
- Idle Speed Alarm: Monitor and manage excessive idling times.
- History Trip Playback: Review past routes and driving history for analysis.
OBD Data Parameters
The C50 OBDII GPS tracker collects a comprehensive set of OBD data, providing valuable insights into vehicle performance and health. This data is similar to what you might access using an ELM327 OBDII scanner, but with the added benefit of GPS tracking.
| Vehicle Information | Measurement Type |
|---|---|
| Vehicle Odometer | Odometer reading (kilometers or miles) |
| Vehicle Battery Voltage | Battery voltage (V) |
| Coolant Temperature | Coolant temperature (°C or °F) |
| OBD Speed | Vehicle speed (km/h or mph) |
| Engine RPM | Engine revolutions per minute (RPM) |
| Engine Load | Engine load (%) |
| Instantaneous Fuel Consumption | Fuel consumption (L/100km or MPG) |
| Intake Air Temperature | Intake air temperature (°C or °F) |
| Engine Air Capacity | Air flow rate (g/s) |
| Manifold Absolute Pressure | Absolute pressure (kPa or psi) |
| Throttle Position | Throttle position (%) |
| Fuel Pressure Measurement | Fuel pressure (kPa or psi) |
| VIN Code | Vehicle Identification Number (17 characters) |
Detailed Specifications
For optimal performance and compatibility, understanding the C50’s specifications is essential.
| Item | Description |
|---|---|
| Name | C50 OBDII GPS Tracker |
| OBD Interface | J1962 OBDII |
| Power Supply | External power supply |
| Working Voltage | DC 9V – 35V |
| Electrical Working Current | 12V/73.6mA |
| Sleep Current | 12V/38.2mA |
| Battery Capacity | 140mAh (3.7V) |
| Battery Type | Lithium polymer battery |
| Working Temperature | -20°C to 75°C |
| Storage Temperature | -30°C to 80°C |
| Working Humidity | 10% to 85% RH |
| MCU | ARM stm32 |
| MCU Model | QUECTEL EC200T (4G) |
| Communication Module | 4G LTE FDD: B1/B3/B5/B8, LTE TDD: B34/B38/B39/B40/B41, WCDMA:B1/B8, TD-SCDMA: B34/B39, EVDO/CDMA2000 1x: BC0 |
| SIM Card | Micro SIM card |
| Antenna | Built-in antenna, external antenna |
| Positioning Module | GPS/BD |
| Cold Start | 32 seconds |
| Hot Start | 1 second |
| Positioning Accuracy | GPS: 5 meters, BD: 10 meters |
| Sensitivity | -162dBm (tracking), -148dBm (acquisition) |
| CAN Wire Interface | Yes |
| Microphone | No |
| Dimension | 66mm x 50mm x 27mm |
| Material | Plastic |
| Appearance | OBDII connector |
| IP Level | IP67 |
| Weight | 60g |
Accessories and LED Indicators
Included Accessories:
- C50 OBDII GPS tracker unit
- User manual – This document serves as your comprehensive guide.
LED Light Status:
Understanding the LED indicators is crucial for monitoring the device’s operational status.
- Red LED (Power): Solid red indicates the device is powered on and working.
- Blue LED (GPS): Flashing blue indicates the device is searching for a GPS signal; solid blue means a GPS signal has been acquired.
- Green LED (4G Network): Flashing green indicates the device is searching for a 4G network; solid green signifies a successful 4G network connection.
Operating Modes
The C50 OBDII GPS tracker operates in distinct modes to optimize power consumption and data reporting based on vehicle status. These modes are similar in concept to how an ELM327 device might be used in different diagnostic scenarios, but here they relate to tracking and data transmission.
- Sleep Mode: Activated when the vehicle’s ignition is off (ACC off). In this mode, the device minimizes power usage and can be woken up by events such as vibration, ignition, or ACC activation.
- Working Mode: Engaged when the vehicle’s ignition is on (ACC on). The device is fully functional, collecting OBD data, tracking location, and sending real-time updates to the server.
Installation Guide
Setting up the C50 OBDII GPS tracker is straightforward:
- Locate the OBDII Port: The OBDII port is typically located under the dashboard on the driver’s side of most vehicles. Refer to your vehicle’s manual if you are unsure of its location.
- Insert the C50 Tracker: Carefully plug the C50 device into the OBDII port. Ensure it is securely connected.
- Verify LED Status: Check the LED indicators to confirm the device is powered on and establishing connections.
Example of OBDII port location in a vehicle, for installing OBDII devices like the C50 GPS tracker.
Note: The C50 is compatible with vehicles equipped with a standard OBDII port. Ensure your vehicle has this port before installation. If you are familiar with ELM327 OBDII scanners, the connection process is similarly plug-and-play.
SMS Command Configuration
The C50 supports SMS commands for configuration and status queries, offering a way to interact with the device remotely. These commands are your text-based manual for device control.
| Feature | Command Format | Device Reply |
|---|---|---|
| Authorized Number Setting | 101#PhoneNumber# |
OK |
| Query Device Status | CXZT |
Device status, software version, ID, GPS/GSM signal, battery, ICCID, IMEI |
| Query Google Link | G1234 |
Google Maps link with current location |
| Device Reboot | CQ |
system reset OK! |
| GPS Reboot | CQGPS |
GPS reset OK! |
| Recover Factory Setting | FORMAT |
OK |
| APN Setting | apn123456 apn_value |
apn ok |
| APN User Name Setting | apnuser123456 username |
spnuser ok |
| APN Password Setting | apnpasswd123456 password |
apnpasswd ok |
| Moving Upload Time Setting | freq,123456,seconds |
OK (Sets data upload frequency in moving mode) |
| Static Upload Time Setting | static,123456,seconds |
OK (Sets data upload frequency in static mode) |
| Server IP and Port Setting | IP IP_address port |
set IP OK (Example: IP 198.11.175.123 9056) |
Documents and Resources
For further details and troubleshooting, refer to the user manual:
This guide provides a comprehensive overview of the C50 OBDII GPS Tracker, acting as your “Elm327 Obdii Manual” equivalent for this specific device. Whether you are managing a fleet, monitoring vehicle health, or simply seeking advanced tracking capabilities, understanding and utilizing the C50’s features will enhance your vehicle management experience.
