The AutoLink AL100 OBDII/EOBD Scanner provides an accessible gateway to understanding your vehicle’s health. Designed for ease of use, this tool supports all 10 modes of OBDII testing, enabling comprehensive and rapid diagnostics for both DIY enthusiasts and professional technicians. This Bluetooth-enabled device is compatible with a wide range of vehicles, making it a valuable addition to any garage.
Understanding OBDII and EOBD
OBDII (On-Board Diagnostics II) and EOBD (European On-Board Diagnostics) are standardized systems that monitor and report on a vehicle’s emissions and engine performance. These standards ensure that vehicles meet specific environmental regulations by tracking key components and systems. When your car’s check engine light illuminates, it signals that the OBDII/EOBD system has detected an issue. An Autolink Obdii Eobd scanner like the AL100 allows you to communicate with your vehicle’s computer to understand what triggered the warning.
Autolink AL100: Features and Benefits
The Autolink AL100 autolink obdii eobd scanner is packed with features designed to simplify vehicle diagnostics:
- Broad Vehicle Compatibility: Works with all 1996 and newer vehicles (OBDII & CAN), covering both domestic and imported models, ensuring wide-ranging application.
- Wireless Bluetooth Connectivity: Supports seamless Bluetooth wireless connection, enhancing user convenience and flexibility during diagnostics.
- Comprehensive Code Support: Retrieves generic (P0, P2, P3, and U0), manufacturer-specific (P1, P3, and U1), and pending codes, providing detailed insights into vehicle issues.
- Check Engine Light Diagnosis: Accurately identifies the cause of the Check Engine Light (MIL), helping users understand the problem at hand.
- MIL Reset and Code Clearing: Turns off the check engine light (MIL), clears diagnostic trouble codes (DTCs), and resets monitors, allowing for verification of repairs.
- Freeze Frame Data Analysis: Views freeze frame data, capturing critical vehicle parameters at the moment a fault occurred, aiding in pinpointing issues.
- I/M Readiness Status: Displays monitor and I/M readiness status, essential for emissions testing and ensuring vehicle compliance.
- Live PCM Data Stream: Reads live PCM datastream, offering real-time data on engine performance for in-depth analysis.
- O2 Sensor Test Data: Displays live O2 sensor test data, crucial for monitoring and maintaining optimal fuel efficiency and emissions.
- Live Sensor Data Management: Reads, stores, and plays back live sensor data, enabling thorough review and comparison of vehicle performance over time.
- Enhanced OBDII Mode 6: Supports Enhanced OBDII Mode 6, providing access to advanced diagnostic test results.
- Troubleshooter Code Tips: Offers troubleshooter code tips, guiding users towards the root cause of trouble codes for faster and more effective repairs.
- Vehicle Information Retrieval: Retrieves vehicle information (VIN, CIN, and CVN), ensuring accurate vehicle identification for diagnostics and record-keeping.
- Extensive Troubleshooter Database: Features thousands of troubleshooter code tips, a valuable resource for both DIY users and professional technicians, saving time and improving diagnostic accuracy.
- Versatile Bluetooth Support: Supports Bluetooth connection with laptops and pads, expanding compatibility and usage scenarios.
AL100 Specifications
| Specification | Value |
|---|---|
| Operating Voltage | DC + 12V |
| Operating Temperature | 0°C to 55°C (32°F to 131°F) |
| Storage Temperature | -25°C to 70°C (-13°F to 158°F) |
| Average Operating Current | ≤50mA |
| Wireless Working Range | 2 meters |
| Maximum Transmission Power | 4 dBm |
| Protocols | ISO15765-4 (CAN); ISO14230-4 (KWP2000) ISO9141-2 ; J1850 VPW; J1850 PWM |
| Operating System | IOS |
Setting Up Your Autolink AL100
Getting started with your Autolink AL100 autolink obdii eobd scanner is straightforward:
- Connect to Vehicle: Plug the AL100 adapter into the OBD II Data Link Connector, typically located under the dashboard. Turn the ignition to the ON position, with the engine off. The adapter LED will light up red.
- Enable Bluetooth: Activate Bluetooth on your iOS device. Navigate to Settings > Bluetooth and turn Bluetooth ON. Ensure your device is within range of the AL100 adapter.
- Pairing: Locate your AL100 on the list of available Bluetooth devices and tap “AL100-XXXXXXXX” to pair. Successful pairing is indicated by the adapter LED turning blue.
- Launch Application: Once paired, return to the home screen and tap the AL100 app icon to begin diagnostics.
The Autolink AL100 provides a user-friendly and efficient way to perform vehicle diagnostics. Whether you are a car enthusiast managing your vehicle maintenance or a professional technician needing a reliable autolink obdii eobd scan tool, the AL100 is designed to deliver accurate and dependable results.
Contact information:
Whatsapp: +86-13429866263 Email: [email protected]
Join our community: [
