Autel Update Software: How to Update Your EVO II Firmware

Updating your Autel EVO II firmware is crucial for optimal performance and access to the latest features. This guide provides comprehensive instructions on how to perform Autel Update Software procedures for your EVO II drone using both over-the-air (OTA) updates and microSD card methods. We’ll also cover how to verify your current firmware version to ensure you’re always running the latest software.

Updating EVO II Firmware Over-the-Air (OTA)

The easiest way to perform an Autel update software procedure on your EVO II is via OTA updates. This method leverages your mobile device’s internet connection to download and install the latest firmware directly onto your drone. Here’s a step-by-step guide:

1. Power On and Connect: Turn on your EVO II aircraft and remote controller. Connect your smartphone or tablet to the remote controller and ensure it has a stable Wi-Fi or cellular data connection.

2. Launch Autel Explorer App: Open the Autel Explorer app on your mobile device. The app will automatically check for firmware updates by comparing your current version with the Autel server. This process may take 30-60 seconds. If an update is available, a blue banner notification will appear at the bottom of the screen.

3. Download the Firmware: Tap the blue banner to view the release notes for the new firmware version. Tap “Download” to download the update file to your mobile device.

4. Upload to EVO II: Once the download is complete, tap “Start Uploading” to transfer the firmware from your mobile device to your EVO II.

5. Monitor Update Progress: You can monitor the upload and installation progress on the built-in screen of your EVO II remote controller.

Updating EVO II Firmware via microSD Card

Alternatively, you can update your EVO II firmware using a microSD card. This method is useful if you have limited or no internet connectivity.

1. Download Firmware File: Visit the official Autel website’s downloads section (https://auteldrones.com/pages/evo-ii-downloads) and locate the latest firmware file for your specific EVO II model. Download the .BIN file.

2. Copy to microSD Card: Copy the downloaded firmware file to the root directory of a formatted microSD card. Important: Do not place the file within any folders on the card.

3. Insert into EVO II: Insert the microSD card into the EVO II aircraft.

4. Power On and Update: Power on the aircraft and remote controller. The firmware update process will begin automatically. You can track the progress on the remote controller’s screen.

5. Reboot: After the update completes, reboot your EVO II aircraft and remote controller.

Verifying Your EVO II Firmware Version

To confirm that your Autel update software procedure was successful, follow these steps:

1. Connect to Autel Explorer: Connect your powered-on EVO II and remote controller to your mobile device and open the Autel Explorer app.

2. Access Settings: Tap the “Camera” option, then tap the gear icon in the top right corner to access the Settings menu.

3. Find Firmware Version: Navigate to “General” and then tap “Firmware Version”.

4. Compare with Latest Version: Compare your displayed firmware versions with the latest versions listed on the Autel website’s downloads page. If the numbers match, your firmware is up to date.

Keeping your EVO II’s firmware current ensures peak performance, reliability, and access to the latest features and improvements offered by Autel. Regularly checking for and installing Autel update software is a crucial part of drone ownership.