Autel MaxiIM IM608 Key Programming: Your Ultimate Guide

Autel Maxiim Im608 Key Programming stands as a comprehensive solution, empowering automotive professionals with unparalleled diagnostic and key programming capabilities, readily available at CARDIAGTECH.NET. This cutting-edge tool streamlines complex procedures, saving time and enhancing efficiency. Discover advanced key learning, key generation, and immobilizer functionalities that revolutionize automotive services. Unlock the full potential of your automotive repair services with this powerful tool.

1. Understanding Autel MaxiIM IM608 Key Programming

The Autel MaxiIM IM608 emerges as a game-changing tool in the automotive diagnostic and key programming landscape. It’s not just another diagnostic scanner; it’s a comprehensive solution designed to meet the evolving needs of modern automotive locksmiths and technicians. Let’s delve into what makes this tool stand out.

1.1. What is the Autel MaxiIM IM608?

The Autel MaxiIM IM608 is an advanced key programming and diagnostic tool that combines powerful IMMO (immobilizer) and key programming functions with OE-level (Original Equipment) diagnostics and advanced service functions. It is designed as an all-in-one solution, integrating these capabilities into a user-friendly, Android-based tablet. Technicians can perform various functions, including key learning, remote control programming, diagnostic scanning, and complex repairs.

1.2. Key Features and Capabilities

The MaxiIM IM608 boasts a wide array of features that make it an indispensable tool for automotive professionals:

Comprehensive Key Programming: Supports reading PIN/CS codes, key generation, key learning, and remote learning.
Advanced Diagnostics: Offers OE-level diagnostics for over 80 US, Asian, and European vehicle makes.
IMMO Functionality: Includes IMMO ECU reset/adaptation, refresh/coding, and transponder read/write capabilities.
EEPROM/MCU Read/Write: Allows direct reading and writing of EEPROM (Electrically Erasable Programmable Read-Only Memory) and MCU (Microcontroller Unit) data.
Extensive Service Menu: Provides access to common maintenance tasks like EPB (Electronic Parking Brake), DPF (Diesel Particulate Filter), SAS (Steering Angle Sensor), Oil Reset, and BMS (Battery Management System) functions.
Smart and Expert Modes: Offers both guided, automated key learning (Smart Mode) and advanced, customizable key learning (Expert Mode).
Cloud-Based Reporting: Stores all maintenance reports in the cloud for easy access and sharing.

1.3. Who is the IM608 Designed For?

The Autel MaxiIM IM608 is specifically designed for professionals in the automotive industry, including:

Automotive Locksmiths: Crucial for programming keys, handling immobilizer issues, and providing key-related services.
Auto Technicians and Mechanics: Beneficial for diagnosing vehicle issues, performing advanced repairs, and offering key programming as part of their service repertoire.
Service Centers and Garages: Enhances service offerings and increases customer satisfaction by providing comprehensive diagnostic and key programming solutions.

1.4. Benefits of Using the Autel MaxiIM IM608

The benefits of using the Autel MaxiIM IM608 are substantial:

Increased Efficiency: Combines multiple functions into one tool, reducing the need for carrying various devices.
Expanded Service Offerings: Allows businesses to offer key programming services, attracting more customers.
User-Friendly Interface: The Android-based touchscreen is intuitive and easy to navigate, reducing the learning curve for new users.
Comprehensive Vehicle Coverage: Supports a wide range of vehicle makes and models, making it a versatile tool for diverse automotive shops.
Regular Updates: Autel provides regular software updates, ensuring the tool stays current with the latest vehicle models and technologies.

2. Key Programming Capabilities of Autel MaxiIM IM608

The Autel MaxiIM IM608 is celebrated for its impressive key programming abilities. Key programming involves more than just cutting a new key; it includes synchronizing the key with the vehicle’s immobilizer system to ensure the car starts. Here’s a detailed look at what the IM608 can do.

2.1. Reading PIN/CS Codes

One of the primary functions of the IM608 is reading PIN (Personal Identification Number) and CS (Component Security) codes from vehicles. These codes are necessary to program new keys and remotes. The process typically involves connecting the IM608 to the vehicle’s OBD (On-Board Diagnostics) port and using the tool to extract the required information.

Importance: PIN/CS codes are essential for bypassing the vehicle’s immobilizer system when programming new keys.
Vehicle Coverage: The IM608 supports PIN/CS code reading for a wide range of vehicle brands and models.
Process: Connect the IM608 to the OBD port, select the vehicle’s make and model, and follow the on-screen instructions to read the PIN/CS codes.

2.2. Key Generation

Key generation involves creating a new key that is compatible with the vehicle’s immobilizer system. The IM608 can generate keys using various methods, including transponder programming and remote control programming.

Transponder Programming: The IM608 can program transponder chips to match the vehicle’s immobilizer system. This involves reading data from the original key (if available) and writing it to the new transponder.
Remote Control Programming: The IM608 can also program remote controls to lock, unlock, and start the vehicle. This process involves synchronizing the remote with the vehicle’s receiver module.
Vehicle Coverage: The IM608 supports key generation for a vast array of vehicle makes and models, making it a versatile tool for locksmiths and auto technicians.
Process: Select the vehicle’s make and model, choose the key generation function, and follow the on-screen prompts to program the new key or remote.

2.3. Key Learning

Key learning, also known as key programming or key matching, involves teaching the vehicle’s immobilizer system to recognize the new key. This ensures that the new key can start the vehicle without any issues.

Smart Mode: The IM608 offers a Smart Mode that guides users through the key learning process with step-by-step instructions. This mode is ideal for beginners or technicians who prefer a simplified approach.
Expert Mode: The IM608 also offers an Expert Mode that allows advanced users to customize the key learning process. This mode provides more control over the programming parameters and allows for advanced troubleshooting.
Vehicle Coverage: The IM608 supports key learning for a wide range of vehicle makes and models, ensuring compatibility with various immobilizer systems.
Process: Connect the IM608 to the OBD port, select the vehicle’s make and model, choose the key learning function, and follow the on-screen instructions to program the new key.

2.4. Remote Learning

Remote learning involves programming the vehicle to recognize the remote control functions of the key. This ensures that the remote can lock, unlock, and start the vehicle remotely.

Vehicle Coverage: The IM608 supports remote learning for a wide range of vehicle makes and models, making it a versatile tool for locksmiths and auto technicians.
Process: Connect the IM608 to the OBD port, select the vehicle’s make and model, choose the remote learning function, and follow the on-screen prompts to program the remote control.

2.5. All Keys Lost Scenarios

One of the most challenging situations in key programming is when all keys are lost. In these scenarios, the technician needs to bypass the vehicle’s immobilizer system to program new keys. The IM608 is designed to handle all keys lost scenarios with ease.

PIN/CS Code Extraction: The IM608 can extract the necessary PIN/CS codes to bypass the immobilizer system.
Key Generation: The IM608 can generate new keys that are compatible with the vehicle’s immobilizer system.
Key Learning: The IM608 can teach the vehicle’s immobilizer system to recognize the new keys, ensuring that the vehicle can start without any issues.
Vehicle Coverage: The IM608 supports all keys lost scenarios for a wide range of vehicle makes and models, making it an indispensable tool for locksmiths and auto technicians.

2.6. Immobilizer ECU Reset/Adaptation, Refresh/Coding

The IM608 allows for the reset, adaptation, refresh, and coding of the immobilizer ECU (Electronic Control Unit). This is essential when replacing or reprogramming the immobilizer system.

ECU Reset: Resets the immobilizer ECU to its factory settings, allowing for new key programming.
ECU Adaptation: Adapts the immobilizer ECU to the vehicle’s specific configuration, ensuring proper functioning.
ECU Refresh: Refreshes the immobilizer ECU software, resolving potential issues and improving performance.
ECU Coding: Codes the immobilizer ECU to match the vehicle’s VIN (Vehicle Identification Number), ensuring compatibility.
Vehicle Coverage: The IM608 supports immobilizer ECU reset/adaptation, refresh/coding for a wide range of vehicle makes and models, making it a versatile tool for advanced diagnostics and repairs.

3. Advanced Diagnostic Capabilities of Autel MaxiIM IM608

Beyond key programming, the Autel MaxiIM IM608 also serves as a powerful diagnostic tool. Its advanced diagnostic capabilities allow technicians to perform OE-level diagnostics on various vehicle systems, identify issues, and perform necessary repairs.

3.1. OE-Level Diagnostics

The Autel MaxiIM IM608 offers OE-level diagnostics, meaning it can perform the same diagnostic functions as the diagnostic tools used by the vehicle manufacturers themselves. This includes reading and clearing diagnostic trouble codes (DTCs), viewing live data streams, performing active tests, and accessing ECU information.

Comprehensive System Coverage: The IM608 supports diagnostics for all major vehicle systems, including engine, transmission, ABS (Anti-lock Braking System), SRS (Supplemental Restraint System), and more.
Detailed Diagnostic Information: The IM608 provides detailed diagnostic information, including DTC descriptions, possible causes, and recommended repair procedures.
Bi-Directional Control: The IM608 supports bi-directional control, allowing technicians to send commands to the vehicle’s ECUs to test various components and systems.
Vehicle Coverage: The IM608 offers OE-level diagnostics for over 80 US, Asian, and European vehicle makes, making it a versatile tool for diverse automotive shops.

3.2. Reading and Clearing Diagnostic Trouble Codes (DTCs)

One of the most common diagnostic functions is reading and clearing DTCs. The IM608 can quickly scan the vehicle’s systems for DTCs, providing valuable information about potential issues.

DTC Descriptions: The IM608 provides detailed descriptions of the DTCs, helping technicians understand the nature of the problem.
Possible Causes: The IM608 also suggests possible causes for the DTCs, guiding technicians towards the root cause of the issue.
Clearing DTCs: Once the issue is resolved, the IM608 can clear the DTCs from the vehicle’s systems, turning off the check engine light or other warning lights.
Vehicle Coverage: The IM608 supports reading and clearing DTCs for a wide range of vehicle makes and models, making it an essential tool for any automotive shop.

3.3. Viewing Live Data Streams

Viewing live data streams is another essential diagnostic function. The IM608 can display real-time data from various sensors and components, allowing technicians to monitor the vehicle’s performance and identify anomalies.

Customizable Data Streams: The IM608 allows technicians to customize the data streams, selecting the specific parameters they want to monitor.
Graphical Display: The IM608 can display the data streams in graphical format, making it easier to visualize trends and patterns.
Data Logging: The IM608 can log the data streams, allowing technicians to review the data later for further analysis.
Vehicle Coverage: The IM608 supports viewing live data streams for a wide range of vehicle makes and models, providing valuable insights into the vehicle’s performance.

3.4. Performing Active Tests

Active tests, also known as actuation tests, allow technicians to send commands to the vehicle’s ECUs to test various components and systems. This can help verify the functionality of actuators, solenoids, relays, and other devices.

Component Testing: The IM608 can activate individual components to verify their operation, such as turning on the fuel pump, activating the cooling fan, or cycling the ABS pump.
System Testing: The IM608 can also perform system tests, such as EVAP (Evaporative Emission Control System) leak tests, EGR (Exhaust Gas Recirculation) tests, and more.
Vehicle Coverage: The IM608 supports performing active tests for a wide range of vehicle makes and models, making it a valuable tool for advanced diagnostics.

3.5. Accessing ECU Information

The IM608 can access ECU information, including the ECU part number, software version, and calibration data. This information can be useful for identifying compatibility issues, performing ECU programming, and accessing technical service bulletins (TSBs).

ECU Identification: The IM608 can quickly identify the vehicle’s ECUs, providing valuable information for diagnostics and repairs.
Software Updates: The IM608 can also check for available software updates for the vehicle’s ECUs, ensuring that the vehicle is running the latest software.
Vehicle Coverage: The IM608 supports accessing ECU information for a wide range of vehicle makes and models, making it an essential tool for any automotive shop.

4. Advanced Service Functions of Autel MaxiIM IM608

In addition to key programming and diagnostics, the Autel MaxiIM IM608 offers a range of advanced service functions. These functions allow technicians to perform common maintenance tasks, reset service reminders, and perform specialized procedures.

4.1. Extensive Maintenance/Services Menu

The IM608 features an extensive maintenance/services menu that provides direct access to various service functions. This menu includes options for EPB, DPF, SAS, Oil Reset, BMS, and more.

User-Friendly Interface: The maintenance/services menu is easy to navigate, with clear and concise descriptions of each function.
Step-by-Step Instructions: The IM608 provides step-by-step instructions for each service function, guiding technicians through the process.
Vehicle Coverage: The IM608 supports a wide range of service functions for various vehicle makes and models, making it a versatile tool for automotive maintenance.

4.2. Electronic Parking Brake (EPB) Service

The EPB service function allows technicians to retract the brake calipers, reset the EPB system, and perform other EPB-related tasks. This is essential when replacing brake pads or rotors on vehicles with electronic parking brakes.

Caliper Retraction: The IM608 can retract the brake calipers, allowing for easy replacement of brake pads or rotors.
EPB Reset: The IM608 can reset the EPB system, ensuring proper functioning after brake service.
Vehicle Coverage: The IM608 supports EPB service for a wide range of vehicle makes and models with electronic parking brakes.

4.3. Diesel Particulate Filter (DPF) Regeneration

The DPF regeneration function allows technicians to perform forced regeneration of the diesel particulate filter. This helps clear the DPF of accumulated soot, improving engine performance and fuel efficiency.

Forced Regeneration: The IM608 can initiate a forced regeneration cycle, burning off the accumulated soot in the DPF.
DPF Reset: The IM608 can reset the DPF system, ensuring proper functioning after regeneration.
Vehicle Coverage: The IM608 supports DPF regeneration for a wide range of vehicle makes and models with diesel engines.

4.4. Steering Angle Sensor (SAS) Calibration

The SAS calibration function allows technicians to calibrate the steering angle sensor. This is essential after performing wheel alignments, suspension repairs, or replacing the SAS module.

SAS Calibration: The IM608 can calibrate the steering angle sensor, ensuring accurate readings and proper functioning of the vehicle’s stability control system.
Vehicle Coverage: The IM608 supports SAS calibration for a wide range of vehicle makes and models.

4.5. Oil Reset Service

The oil reset service function allows technicians to reset the oil life reminder after performing an oil change. This ensures that the vehicle’s maintenance schedule is accurate and up-to-date.

Oil Life Reset: The IM608 can reset the oil life reminder, turning off the service light and setting the interval for the next oil change.
Vehicle Coverage: The IM608 supports oil reset service for a wide range of vehicle makes and models.

4.6. Battery Management System (BMS) Service

The BMS service function allows technicians to register a new battery with the vehicle’s battery management system. This is essential when replacing the battery on vehicles with advanced battery management systems.

Battery Registration: The IM608 can register the new battery with the BMS, ensuring proper charging and battery life.
Vehicle Coverage: The IM608 supports BMS service for a wide range of vehicle makes and models with advanced battery management systems.

5. Hardware and Software Specifications

The Autel MaxiIM IM608 is not just about its functions; its hardware and software specifications are equally impressive, ensuring reliable and efficient performance.

5.1. Hardware Overview

Operating System: Android 10
Processor: Qualcomm SDM660 Octa-core Processor (2.2GHz)
Memory: 4GB RAM & 128GB On-board Memory
Display: 10.1-inch LED capacitive touchscreen with 1920×1200 resolution
Connectivity: Wi-Fi (802.11 a/b/g/n/ac), USB 2.0, BT v.2.1 + EDR, SD Card (Support up to 64GB), HDMI
Sensors: Light sensor for brightness auto adjust
Power and Battery: 15000 mAh 3.8 V lithium-polymer battery, Charging via 12 V AC/DC power supply
Input Voltage: 12 V (9-24 V)
Operating Temp.: 0 to 50°C (32 to 122°F)

5.2. Software Features

Smart Mode: Guided and automated key learning.
Expert Mode: Advanced key learning with customization options.
Extensive Vehicle Coverage: Supports over 80 US, Asian, and European vehicle makes.
Cloud-Based Reporting: Stores all maintenance reports in the cloud for easy access and sharing.
Regular Updates: Autel provides regular software updates to ensure the tool stays current with the latest vehicle models and technologies.

5.3. Included Accessories

The Autel MaxiIM IM608 comes with a comprehensive set of accessories, including:

MaxiIM IM608 Tablet
XP400 Pro Key Programmer
MaxiFlash JVCI+
Main Cable
USB Cable
Mini USB Cable
AC/DC Adapter
Spare Fuses
Auxiliary Power Outlet Adapter
Various Adapters and Cables

These accessories ensure that technicians have everything they need to perform a wide range of key programming and diagnostic tasks.

6. How to Use Autel MaxiIM IM608 for Key Programming

Using the Autel MaxiIM IM608 for key programming involves a series of steps, from connecting the tool to the vehicle to programming the new key. Here’s a general guide to the process.

6.1. Initial Setup

Power On: Turn on the Autel MaxiIM IM608 tablet.
Connect to Wi-Fi: Connect the tablet to a Wi-Fi network to ensure access to the latest software updates and online resources.
Software Updates: Check for and install any available software updates.
Vehicle Selection: Select the vehicle’s make, model, and year from the menu.

6.2. Connecting to the Vehicle

Locate OBD Port: Find the OBD port in the vehicle (usually located under the dashboard).
Connect Cable: Connect the main cable from the IM608 to the OBD port.
Establish Connection: Ensure that the IM608 establishes a stable connection with the vehicle.

6.3. Key Programming Process

Select Key Programming Function: From the main menu, select the key programming function.
Read PIN/CS Code: Follow the on-screen instructions to read the PIN/CS code from the vehicle.
Generate Key: Use the IM608 to generate a new key that is compatible with the vehicle’s immobilizer system.
Learn Key: Follow the on-screen prompts to teach the vehicle’s immobilizer system to recognize the new key.
Test Key: Test the new key to ensure that it can start the vehicle and operate the remote control functions.

6.4. Tips for Successful Key Programming

Stable Power Supply: Ensure that the vehicle has a stable power supply during the key programming process.
Correct Vehicle Selection: Double-check that you have selected the correct vehicle make, model, and year.
Follow Instructions: Carefully follow the on-screen instructions provided by the IM608.
Check Compatibility: Verify that the new key is compatible with the vehicle’s immobilizer system.
Stay Updated: Keep the IM608 software up-to-date to ensure compatibility with the latest vehicle models and technologies.

7. Maintaining and Updating Your Autel MaxiIM IM608

To ensure that your Autel MaxiIM IM608 continues to perform at its best, it’s important to maintain and update the tool regularly.

7.1. Regular Software Updates

Autel releases regular software updates to improve the performance of the IM608, add new features, and ensure compatibility with the latest vehicle models.

Check for Updates: Periodically check for software updates on the IM608 tablet.
Install Updates: Install the updates as soon as they are available to take advantage of the latest improvements.
Wi-Fi Connection: Ensure that the tablet is connected to a stable Wi-Fi network during the update process.

7.2. Hardware Maintenance

Keep Clean: Keep the tablet and accessories clean to prevent damage.
Store Properly: Store the tool in a safe place when not in use.
Check Cables: Regularly check the cables for wear and tear.
Battery Care: Follow the manufacturer’s instructions for battery care.

7.3. Troubleshooting Common Issues

Connection Problems: If you experience connection problems, check the cables, OBD port, and vehicle battery.
Software Glitches: If you encounter software glitches, try restarting the tablet or reinstalling the software.
Compatibility Issues: If you have compatibility issues, ensure that you have selected the correct vehicle make, model, and year.

8. Why Choose CARDIAGTECH.NET for Your Autel MaxiIM IM608?

When it comes to purchasing the Autel MaxiIM IM608, choosing the right supplier is crucial. CARDIAGTECH.NET offers several advantages that make it the ideal choice for your automotive diagnostic and key programming needs.

8.1. Competitive Pricing

CARDIAGTECH.NET offers competitive pricing on the Autel MaxiIM IM608, ensuring that you get the best value for your money.

8.2. Expert Support

CARDIAGTECH.NET provides expert support to help you get the most out of your Autel MaxiIM IM608. Our knowledgeable staff can answer your questions, provide technical assistance, and help you troubleshoot any issues.

8.3. Wide Range of Products

In addition to the Autel MaxiIM IM608, CARDIAGTECH.NET offers a wide range of automotive diagnostic tools, key programmers, and accessories. This makes it easy to find everything you need to equip your automotive shop.

8.4. Fast Shipping

CARDIAGTECH.NET offers fast shipping, ensuring that you receive your Autel MaxiIM IM608 as quickly as possible.

8.5. Customer Satisfaction

CARDIAGTECH.NET is committed to customer satisfaction. We strive to provide the best possible shopping experience, from product selection to after-sales support.

9. Real-World Applications and Success Stories

The Autel MaxiIM IM608 has proven its value in numerous real-world applications, helping automotive professionals streamline their workflows and increase their efficiency.

9.1. Automotive Locksmiths

Automotive locksmiths use the IM608 to program keys, handle immobilizer issues, and provide key-related services. The tool’s comprehensive key programming capabilities make it an essential part of their toolkit.

9.2. Auto Technicians and Mechanics

Auto technicians and mechanics use the IM608 to diagnose vehicle issues, perform advanced repairs, and offer key programming as part of their service repertoire. The tool’s OE-level diagnostics and extensive service functions make it a versatile asset.

9.3. Service Centers and Garages

Service centers and garages use the IM608 to enhance their service offerings and increase customer satisfaction. By providing comprehensive diagnostic and key programming solutions, they can attract more customers and build a loyal following.

10. The Future of Key Programming with Autel MaxiIM IM608

The future of key programming is evolving rapidly, with new technologies and vehicle models constantly emerging. The Autel MaxiIM IM608 is well-positioned to meet these challenges, thanks to its regular software updates and advanced capabilities.

10.1. Emerging Technologies

As vehicle technology continues to advance, key programming tools must adapt to new challenges. The Autel MaxiIM IM608 is designed to stay current with the latest technologies, including:

Advanced Immobilizer Systems: The IM608 supports the latest immobilizer systems, ensuring compatibility with new vehicle models.
Remote Keyless Entry (RKE): The IM608 can program RKE systems, allowing customers to lock, unlock, and start their vehicles remotely.
Keyless Start Systems: The IM608 can also program keyless start systems, providing added convenience and security.

10.2. Staying Ahead of the Curve

To stay ahead of the curve in the rapidly evolving automotive industry, it’s important to invest in the right tools and training. The Autel MaxiIM IM608 is a valuable investment that can help you:

Expand Your Service Offerings: By offering key programming services, you can attract more customers and increase your revenue.
Improve Your Efficiency: The IM608 can help you streamline your workflows and reduce the time it takes to perform key programming tasks.
Stay Competitive: By staying current with the latest technologies, you can remain competitive in the automotive industry.

Ready to elevate your automotive services? Contact CARDIAGTECH.NET today at 276 Reock St, City of Orange, NJ 07050, United States, or reach out via Whatsapp at +1 (641) 206-8880. Visit our website CARDIAGTECH.NET for more information and to make your purchase. Let us help you enhance your business with the Autel MaxiIM IM608.

FAQ About Autel MaxiIM IM608 Key Programming

1. What is the Autel MaxiIM IM608?

The Autel MaxiIM IM608 is an advanced key programming and diagnostic tool designed for automotive locksmiths and technicians. It combines key programming functions with OE-level diagnostics and advanced service functions.

2. What key programming functions does the IM608 support?

The IM608 supports reading PIN/CS codes, key generation, key learning, remote learning, IMMO ECU reset/adaptation, refresh/coding, and transponder read/write.

3. What diagnostic capabilities does the Autel MaxiIM IM608 offer?

The IM608 offers OE-level diagnostics, including reading and clearing DTCs, viewing live data streams, performing active tests, and accessing ECU information.

4. What service functions are available on the Autel MaxiIM IM608?

The IM608 features an extensive maintenance/services menu with options for EPB, DPF, SAS, Oil Reset, BMS, and more.

5. What is the Smart Mode on the Autel MaxiIM IM608?

Smart Mode is a guided and automated key learning process that provides step-by-step instructions, making it ideal for beginners.

6. What is the Expert Mode on the Autel MaxiIM IM608?

Expert Mode allows advanced users to customize the key learning process with more control over programming parameters and advanced troubleshooting.

7. How often should I update the software on my Autel MaxiIM IM608?

Regular software updates are crucial to ensure compatibility with the latest vehicle models and technologies. Check for updates periodically and install them as soon as they are available.

8. Where can I purchase the Autel MaxiIM IM608?

You can purchase the Autel MaxiIM IM608 from CARDIAGTECH.NET, a trusted supplier of automotive diagnostic tools and key programmers.

9. What kind of support does CARDIAGTECH.NET offer for the Autel MaxiIM IM608?

CARDIAGTECH.NET offers expert support, including answering questions, providing technical assistance, and helping troubleshoot any issues.

10. How does the Autel MaxiIM IM608 handle all keys lost scenarios?

The IM608 can extract necessary PIN/CS codes, generate new keys, and teach the vehicle’s immobilizer system to recognize the new keys, even when all keys are lost.