The Autel Max 4T is a powerful drone known for its advanced features and robust performance. However, some users have reported issues with extending the display to the remote monitor. This article will troubleshoot common reasons why your Autel Max 4T might not be extending its display and provide potential solutions.
Common Causes and Solutions
Several factors can prevent the Autel Max 4T from extending its display to the remote monitor. Here are the most common culprits:
Connection Issues
- Loose Cables: Ensure all cables connecting the drone and the remote controller are securely fastened. Check both ends of the HDMI and USB cables for any signs of damage or loose connections.
- Incorrect Cable Type: Verify you are using the correct HDMI cable. The Autel Max 4T requires a specific type of HDMI cable for proper signal transmission. Consult your user manual for the recommended cable specifications.
- Port Problems: Try different ports on both the drone and the remote controller. Dust or debris can sometimes obstruct the connection. Gently clean the ports with compressed air.
Software and Firmware
- Outdated Firmware: Outdated firmware on either the drone or the remote controller can lead to compatibility issues. Ensure both devices are running the latest firmware versions available on the Autel Robotics website.
- App Compatibility: Make sure you are using the latest version of the Autel Enterprise App. Older app versions might not be optimized for the latest drone firmware, causing display problems.
- Corrupted Software: If you suspect corrupted software, try reinstalling the Autel Enterprise App on your remote controller.
Hardware Malfunction
- Remote Controller Issues: If you have tried all the software and connection troubleshooting steps, the remote controller itself might be faulty. Contact Autel support for further assistance or warranty claims.
- Drone HDMI Port Damage: Physical damage to the drone’s HDMI port can also prevent display extension. Inspect the port for any bent pins or signs of damage. Contact Autel support if you suspect hardware damage.
Preventing Display Issues
- Regular Updates: Keep both the drone and remote controller firmware up to date to ensure optimal performance and compatibility.
- Proper Cable Management: Avoid bending or twisting cables excessively. Store cables properly to prevent damage.
- Cleanliness: Regularly clean the connection ports on both devices to prevent dust and debris buildup.
Conclusion
If your Autel Max 4T will not extend the display to the remote monitor, systematically troubleshoot connection issues, software compatibility, and potential hardware malfunctions. Start with the simplest solutions, such as checking cables, and progressively move to more complex troubleshooting steps. Regular maintenance and updates can help prevent future display problems. If the issue persists, contact Autel support for expert assistance.
