The Autel Evo is a powerful drone known for its impressive features and performance. However, like any complex electronic device, it can sometimes encounter issues that prevent it from launching. If your Autel Evo Will Not Launch, this guide will provide troubleshooting steps and a firmware update guide to help you get back in the air.
Common Reasons Why Your Autel Evo Won’t Launch
Several factors can contribute to an Autel Evo failing to launch. These include:
- Low Battery: Ensure your drone’s battery has at least a 25% charge before attempting to launch. A low battery can prevent the drone from powering on or initializing properly.
- Firmware Issues: Outdated or corrupted firmware can cause various problems, including launch failures. Updating to the latest firmware version is often a crucial troubleshooting step.
- SD Card Problems: A faulty or incorrectly formatted SD card can interfere with the drone’s startup process. Make sure you’re using a compatible SD card formatted to FAT32.
- App Connection Issues: Problems with the Autel Sky app, such as connection errors or outdated versions, can hinder the drone’s launch sequence. Ensure the app is up-to-date and properly connected to the drone.
- Hardware Malfunctions: In rare cases, a hardware component malfunction can prevent the drone from launching. This might require professional repair.
Updating Your Autel Evo Firmware
Updating the firmware on your Autel Evo can resolve many launch issues and improve overall performance. Follow these steps to update your drone’s firmware using an SD card:
-
Prepare for the Update: Charge your Autel Evo battery to at least 25%. Download the latest firmware version for your specific Evo model from the official Autel Robotics website. Format a compatible SD card to FAT32.
-
Copy the Firmware: Copy the downloaded firmware file (it should be a .zip file) to the root directory of the formatted SD card. Do not extract the file or place it in any folders on the SD card.
-
Initiate the Update: Power on the drone and wait for two minutes. Insert the SD card containing the firmware into the drone’s SD card slot.
-
Monitor the Update Process: The indicator lights on the drone’s arms will begin flashing, indicating that the firmware update is in progress. This process typically takes less than 15 minutes. Do not interrupt the update process.
-
Verify the Update: Once the indicator lights stop flashing and remain solid, the update is complete. Wait for two minutes, then reboot the drone. Pair the drone with the Autel Sky app and check the firmware version to confirm the update was successful. The firmware file on the SD card will be automatically deleted after a successful update.
Troubleshooting Steps if Your Autel Evo Still Won’t Launch
If you’ve updated the firmware and your Autel Evo still won’t launch, try these additional troubleshooting steps:
- Retry the Firmware Update: Repeat the firmware update process to ensure there were no errors during the initial attempt.
- Try a Different SD Card: Use a different SD card formatted to FAT32 to rule out any issues with the SD card itself.
- Reinstall the Autel Sky App: Uninstall and reinstall the Autel Sky app on your mobile device to ensure you have the latest version and a clean installation.
- Contact Autel Support: If you’ve exhausted all troubleshooting options, contact Autel Robotics support for further assistance. They can provide more specific guidance or diagnose potential hardware problems.
By following these steps, you can troubleshoot and resolve common issues that prevent your Autel Evo from launching. Remember to always consult the official Autel Robotics website and user manual for the most accurate and up-to-date information specific to your drone model.
