Updating your Autel EVO II firmware is crucial for optimal performance and accessing the latest features. This guide provides step-by-step instructions for updating your drone’s firmware using two methods: Over-the-Air (OTA) updates and microSD card updates. We’ll also cover how to verify your current firmware version.
Updating Autel EVO II Firmware via OTA
The easiest way to perform an Autel Evo Update is via OTA. This method requires a stable internet connection. Here’s how:
-
Power On and Connect: Turn on your EVO II aircraft and remote controller. Connect your smartphone or tablet to the remote controller and ensure it has a working Wi-Fi or cellular data connection.
-
Launch Autel Explorer: Open the Autel Explorer app on your mobile device. The app will automatically check for firmware updates for both your aircraft and remote controller. This process may take 30-60 seconds. If an update is available, a blue banner will appear at the bottom of the screen indicating a new version.
-
Download the Update: Tap the blue banner. A screen will display the new firmware version and its release notes. Tap “Download” to download the firmware to your mobile device.
-
Upload to EVO II: Once the download is complete, tap “Start Uploading.” This will initiate the transfer of the firmware update from your mobile device to your EVO II.
-
Monitor Progress: You can monitor the upload and installation progress on the built-in screen of your EVO II remote controller.
Updating Autel EVO II Firmware via microSD Card
Alternatively, you can update your EVO II firmware using a microSD card. Follow these steps:
-
Download Firmware File: Visit the official Autel Robotics website and navigate to the EVO II downloads page (https://auteldrones.com/pages/evo-ii-downloads). Locate the “Firmware” section and download the appropriate .BIN file for your specific EVO II model.
-
Copy to microSD Card: Copy the downloaded firmware file (e.g., Model-C_FW_V2.X.XX) to the root directory of a formatted microSD card. Do not place the file within any folders on the card.
-
Insert into EVO II: Insert the microSD card into your EVO II aircraft.
-
Power On and Update: Power on your aircraft and remote controller. The firmware update will begin automatically. You can track the progress on the remote controller’s screen.
-
Reboot: After the update completes, reboot both your aircraft and remote controller.
Verifying Your Autel EVO II Firmware Version
To check your current firmware version:
-
Connect to Autel Explorer: Connect your powered-on EVO II and remote controller to your mobile device and open the Autel Explorer app. Select the “Camera” option.
-
Access Settings: Tap the gear icon in the top right corner to access the settings menu.
-
Navigate to Firmware Version: Select “General” and then “Firmware Version.”
-
Compare Versions: A table will display the firmware versions for each component of your aircraft. Compare these numbers to the latest versions listed on the Autel Robotics website to confirm you have the most recent Autel EVO update.
