Autel 6937357202877 Dual Frequency MX-Sensor: The Ultimate Guide

Are you looking for a versatile and reliable TPMS sensor for your automotive repair shop? The Autel 6937357202877 Dual Frequency MX-Sensor is a game-changer, offering wide vehicle coverage and simplified inventory. This 2-in-1 sensor supports both 315MHz and 433MHz frequencies, making it an ideal solution for various vehicle models. Discover how this innovative sensor can streamline your operations, reduce costs, and enhance customer satisfaction, all while keeping you ahead in the rapidly evolving automotive technology landscape. Find out how CARDIAGTECH.NET can equip you with this essential tool to elevate your service offerings.

1. Understanding the Autel 6937357202877 Dual Frequency MX-Sensor

The Autel 6937357202877 Dual Frequency MX-Sensor, available at CARDIAGTECH.NET, is a programmable universal TPMS (Tire Pressure Monitoring System) sensor designed to replace original equipment (OE) sensors in a wide range of vehicles. It combines two frequencies (315MHz and 433MHz) into a single unit, offering extensive vehicle coverage and simplifying inventory management for automotive technicians and repair shops. This sensor is engineered for OE-level fit, performance, and reliability, ensuring accurate tire pressure monitoring and optimal vehicle safety.

1.1 Key Features of the Autel MX-Sensor

Dual Frequency Functionality: Operates on both 315MHz and 433MHz frequencies, covering a broad spectrum of vehicles.
Programmability: Can be programmed wirelessly using Autel TPMS tools to match the specific requirements of different vehicle models.
Wide Vehicle Coverage: Compatible with up to 98% of OE sensors and 90% of North American, European, and Asian vehicles.
User-Friendly Design: Features a PRESS release valve for easy manual replacement and stem removal.
SAE Tested and Certified: Meets SAE industry standards J1205/J1206, ensuring durability and performance in various weather conditions.
Clone-able Sensor ID: Allows for 100% cloning of the original sensor ID, eliminating the need for relearning.
High-Precision Air Valve: Prevents air leakage, maintaining optimal tire pressure.
Automotive-Grade Battery: Designed to withstand severe weather conditions and provide a long service life (over 5 years).
Replaceable Aluminum Valve Stem: Anodized for corrosion resistance, enhancing durability.
Lightweight Design: Weighs only 12g, ensuring sensor stability and performance.

1.2 Technical Specifications

To better understand the capabilities of the Autel 6937357202877 Dual Frequency MX-Sensor, let’s delve into its detailed technical specifications:

Specification	Value
Battery Life	4-6 years
Operating Temperature	-40°C to +125°C
Storage Temperature	-40°C to +35°C
Operating Humidity	≤90%
Operating Frequency	315 MHz / 433 MHz
Pressure Monitoring Range	0 to 800 kPa
Pressure Reading Accuracy	±10 kPa
Temperature Reading Range	-40°C to +125°C
Temperature Reading Accuracy	±5°C
G Sensor Reading Accuracy	±15%
Transmission Power	5-8 dBm
Battery	3.0 V
Weight	12g

1.3 Benefits of Using the Autel MX-Sensor

Reduced Inventory Costs: By combining two frequencies into one sensor, you can significantly reduce the number of sensors you need to keep in stock.
Increased Efficiency: The ability to clone the original sensor ID and the wide vehicle coverage minimize installation time and eliminate the need for relearning.
Enhanced Reliability: The sensor is built to perform like OE sensors, ensuring accurate and reliable tire pressure monitoring.
Improved Customer Satisfaction: By providing a high-quality, reliable TPMS solution, you can enhance customer satisfaction and build trust.
Simplified Maintenance: The user-friendly design and replaceable valve stem make maintenance and replacement easier.
Durability: The sensor is designed to withstand harsh weather conditions and resist corrosion, ensuring long-lasting performance.
Cost Savings: By reducing inventory, minimizing installation time, and providing a durable, reliable solution, the Autel MX-Sensor helps you save money in the long run.

The Autel MX-Sensor combines dual frequency functionality with a user-friendly design.

2. Why Choose Autel 6937357202877 Dual Frequency MX-Sensor?

Choosing the right TPMS sensor is crucial for maintaining vehicle safety and performance. The Autel 6937357202877 Dual Frequency MX-Sensor stands out as a superior choice due to its advanced features, broad compatibility, and exceptional reliability. This sensor not only simplifies inventory management but also enhances the efficiency of automotive repair services. Here are compelling reasons to opt for the Autel MX-Sensor for your automotive needs, available at CARDIAGTECH.NET.

2.1 Unmatched Vehicle Coverage

The Autel MX-Sensor offers unparalleled vehicle coverage, supporting up to 98% of OE sensors and 90% of vehicles in North America, Europe, and Asia. This extensive compatibility ensures that a single sensor can service a wide range of vehicle makes and models, reducing the need to stock multiple sensor types. According to Autel, this broad coverage simplifies inventory management and lowers investment costs for automotive repair shops.

2.2 Dual Frequency Advantage

One of the most significant advantages of the Autel MX-Sensor is its dual frequency functionality. By operating on both 315MHz and 433MHz, the sensor eliminates the need to carry separate sensors for different vehicle models. This 2-in-1 design streamlines the repair process and minimizes the chances of using the wrong sensor, ensuring accurate and reliable TPMS performance.

2.3 Easy Programming and Installation

The Autel MX-Sensor is designed for ease of use, featuring wireless programmability that allows technicians to program the sensor even after it has been mounted on the wheel. The sensor is 100% clone-able, meaning it can replicate the original sensor ID without requiring a vehicle relearn procedure. Additionally, the unique PRESS release valve design simplifies manual sensor replacement, making the entire process quick and efficient.

2.4 Robust and Reliable Performance

Built to meet or exceed OEM sensor standards, the Autel MX-Sensor delivers robust and reliable performance. It is equipped with an automotive-grade battery that withstands severe weather conditions and provides a long service life of over 5 years. The high-precision air valve prevents air leakage, ensuring optimal tire pressure and vehicle safety. Furthermore, the replaceable aluminum valve stem is anodized for corrosion resistance, enhancing the sensor’s durability.

2.5 SAE Tested and Certified

The Autel MX-Sensor has undergone rigorous testing and certification to meet SAE industry standards J1205/J1206. These standards ensure that the sensor can withstand extreme temperatures, vibrations, and other harsh conditions, guaranteeing its reliability and performance. Autel’s commitment to quality is further reinforced by a 24-month or 24,000-mile warranty against manufacturing defects.

2.6 Cost-Effective Solution

By reducing inventory costs, minimizing installation time, and providing a durable, reliable TPMS solution, the Autel MX-Sensor offers significant cost savings for automotive repair shops. The ability to service a wide range of vehicles with a single sensor eliminates the need to invest in multiple sensor types, while the ease of programming and installation reduces labor costs. Additionally, the sensor’s long service life and robust design minimize the need for frequent replacements, further reducing expenses.

2.7 Complete TPMS Solution with Autel Tools

Autel provides a comprehensive TPMS solution by offering both MX-Sensors and user-friendly TPMS tools. This integrated approach ensures seamless compatibility and optimal performance. Autel TPMS tools simplify the programming and activation of MX-Sensors, making the entire TPMS management process more efficient. With Autel’s complete solution, automotive technicians can confidently handle any TPMS-related task.

2.8 Industry Expert Recognition

The Autel MX-Sensor has garnered recognition from industry experts for its innovative design, broad compatibility, and exceptional performance. Automotive professionals appreciate the sensor’s ability to simplify inventory management, reduce costs, and enhance the efficiency of TPMS repairs. The sensor’s positive reputation within the automotive industry underscores its value as a reliable and effective TPMS solution.

3. Key Benefits of Using Autel 6937357202877 Dual Frequency MX-Sensor at CARDIAGTECH.NET

The Autel 6937357202877 Dual Frequency MX-Sensor, available at CARDIAGTECH.NET, offers a multitude of benefits for automotive technicians and repair shops. These advantages range from simplifying inventory management to enhancing the efficiency of TPMS repairs. By understanding these key benefits, you can make an informed decision about whether the Autel MX-Sensor is the right choice for your business.

3.1 Streamlined Inventory Management

One of the most significant advantages of the Autel MX-Sensor is its ability to streamline inventory management. By combining two frequencies (315MHz and 433MHz) into a single sensor, you can significantly reduce the number of sensors you need to keep in stock. This simplifies the ordering process, reduces storage space requirements, and minimizes the risk of running out of the right sensor for a particular vehicle.

3.2 Reduced Costs

The Autel MX-Sensor offers several cost-saving benefits. By reducing inventory requirements, you can lower your upfront investment in TPMS sensors. The sensor’s wide vehicle coverage minimizes the need to purchase multiple sensor types, further reducing expenses. Additionally, the sensor’s ease of programming and installation can help reduce labor costs, while its long service life minimizes the need for frequent replacements.

3.3 Enhanced Efficiency

The Autel MX-Sensor is designed to enhance the efficiency of TPMS repairs. Its wireless programmability allows technicians to program the sensor even after it has been mounted on the wheel. The sensor’s 100% clone-ability eliminates the need for vehicle relearn procedures, saving valuable time. Additionally, the unique PRESS release valve design simplifies manual sensor replacement, making the entire process quick and efficient.

3.4 Broad Vehicle Compatibility

With support for up to 98% of OE sensors and 90% of vehicles in North America, Europe, and Asia, the Autel MX-Sensor offers unmatched vehicle compatibility. This broad coverage ensures that you can service a wide range of vehicle makes and models with a single sensor type. This simplifies the repair process and minimizes the chances of using the wrong sensor, ensuring accurate and reliable TPMS performance.

3.5 Reliable Performance

3.6 Simplified Maintenance

The Autel MX-Sensor is designed for easy maintenance and replacement. The replaceable aluminum valve stem can be easily swapped out if it becomes damaged or corroded. The sensor’s user-friendly design simplifies the removal and installation process, minimizing downtime and reducing labor costs. Additionally, the sensor’s robust construction ensures that it can withstand the rigors of daily use.

3.7 Improved Customer Satisfaction

By providing a high-quality, reliable TPMS solution, the Autel MX-Sensor can help improve customer satisfaction. Customers will appreciate the accurate and reliable tire pressure monitoring, which enhances vehicle safety and performance. The sensor’s long service life and robust design minimize the need for frequent replacements, reducing inconvenience and costs for your customers.

3.8 Technical Support and Training

Autel provides comprehensive technical support and training resources to help you get the most out of your MX-Sensors. Autel’s support team is available to answer your questions and provide guidance on programming, installation, and troubleshooting. Autel also offers online training modules and webinars to help you stay up-to-date on the latest TPMS technologies and best practices.

The Autel MX-Sensor offers 98% vehicle coverage, simplifying your TPMS service.

4. Step-by-Step Guide to Using the Autel 6937357202877 Dual Frequency MX-Sensor

To effectively utilize the Autel 6937357202877 Dual Frequency MX-Sensor, available at CARDIAGTECH.NET, it’s essential to follow a systematic approach. This step-by-step guide provides detailed instructions on how to program, install, and troubleshoot the sensor, ensuring accurate and reliable TPMS performance. Whether you’re an experienced technician or new to TPMS technology, this guide will help you confidently handle any TPMS-related task.

4.1 Programming the Autel MX-Sensor

Before installing the Autel MX-Sensor, it must be programmed to match the specific requirements of the vehicle. Here’s how to program the sensor using an Autel TPMS tool:

Power On the TPMS Tool: Turn on your Autel TPMS tool and ensure it is fully charged or connected to a power source.
Select Vehicle Information: Choose the vehicle make, model, and year from the tool’s menu.
Select Sensor Programming: Navigate to the sensor programming section of the tool.
Choose Programming Method: Select the appropriate programming method, such as “Clone Sensor” or “Auto Create.”
- Clone Sensor: If you have the original sensor ID, select “Clone Sensor” and enter the ID manually or scan it using the tool.
- Auto Create: If you don’t have the original sensor ID, select “Auto Create,” and the tool will generate a unique ID for the sensor.
Program the Sensor: Follow the on-screen instructions to program the MX-Sensor. Hold the sensor close to the tool’s antenna during the programming process.
Verify Programming: After programming, the tool will display a confirmation message. Verify that the sensor ID and other information are correct.

4.2 Installing the Autel MX-Sensor

Once the Autel MX-Sensor has been programmed, it’s time to install it on the wheel. Follow these steps for proper installation:

Loosen the Tire: Remove the valve cap and core, and deflate the tire completely.
Dismount the Tire: Use a tire changer to dismount the tire from the wheel.
Remove the Old Sensor: Remove the old TPMS sensor from the wheel.
Assemble the MX-Sensor: Connect the sensor body to the valve stem at a suitable angle (typically 30 degrees) and tighten the screw.
Install the Sensor: Slide the valve stem through the valve hole of the rim with the sensor on the inside of the rim.
Secure the Sensor: Assemble the screw nut back onto the valve stem with 4.0 Nm of torque.
Mount the Tire: Place the tire on the rim, ensuring that the valve faces the separation head at an angle of 180 degrees.
Inflate the Tire: Inflate the tire to the recommended pressure.
Reinstall the Valve Cap: Reinstall the valve cap to protect the valve core.

4.3 Troubleshooting the Autel MX-Sensor

If you encounter any issues with the Autel MX-Sensor, follow these troubleshooting steps:

Check Sensor Programming: Ensure that the sensor has been programmed correctly and that the sensor ID matches the vehicle’s TPMS system.
Verify Sensor Installation: Make sure that the sensor has been installed properly and that the valve stem is securely fastened.
Check Battery Life: If the sensor is not transmitting a signal, check the battery life using a TPMS tool. If the battery is low, replace the sensor.
Inspect for Damage: Examine the sensor for any signs of physical damage. If the sensor is damaged, replace it.
Scan for Diagnostic Trouble Codes (DTCs): Use a diagnostic tool to scan the vehicle’s TPMS system for DTCs. Refer to the vehicle’s service manual for troubleshooting information.
Contact Autel Support: If you are unable to resolve the issue, contact Autel’s technical support team for assistance.

4.4 Best Practices for Using the Autel MX-Sensor

Always use an Autel TPMS tool to program and activate the MX-Sensor.
Follow the vehicle manufacturer’s recommended tire pressure.
Inspect the valve stem and core regularly for damage or corrosion.
Replace the valve cap whenever you remove it.
Store MX-Sensors in a cool, dry place.
Dispose of old TPMS sensors properly.

5. Real-World Applications of the Autel 6937357202877 Dual Frequency MX-Sensor

The Autel 6937357202877 Dual Frequency MX-Sensor, available at CARDIAGTECH.NET, is a versatile tool that can be used in a variety of real-world applications. From routine tire maintenance to complex TPMS repairs, this sensor offers numerous benefits for automotive technicians and repair shops. By examining these applications, you can gain a better understanding of the sensor’s capabilities and how it can improve your business.

5.1 Routine Tire Maintenance

One of the most common applications of the Autel MX-Sensor is routine tire maintenance. During tire rotations, technicians can use the sensor to check the tire pressure and ensure that the TPMS system is functioning properly. If a sensor is found to be faulty or has a low battery, it can be easily replaced with an Autel MX-Sensor. This helps to maintain optimal tire pressure and vehicle safety.

5.2 TPMS Repairs

The Autel MX-Sensor is an essential tool for TPMS repairs. When a TPMS sensor fails, it can trigger a warning light on the vehicle’s dashboard. Technicians can use an Autel TPMS tool to diagnose the problem and determine if the sensor needs to be replaced. The Autel MX-Sensor’s wide vehicle coverage and ease of programming make it a convenient and cost-effective solution for TPMS repairs.

5.3 Seasonal Tire Changes

Many drivers switch between summer and winter tires depending on the season. During these tire changes, technicians can use the Autel MX-Sensor to ensure that the TPMS system is properly configured for the new set of tires. The sensor’s 100% clone-ability allows technicians to quickly and easily transfer the sensor IDs from the old tires to the new tires, eliminating the need for a vehicle relearn procedure.

5.4 Custom Wheel Installations

When installing custom wheels, it’s important to ensure that the TPMS sensors are compatible with the new wheels. The Autel MX-Sensor is compatible with most aftermarket wheels and can be easily programmed to match the vehicle’s TPMS system. This ensures that the TPMS system continues to function properly, even with custom wheels.

5.5 Fleet Management

The Autel MX-Sensor is a valuable tool for fleet management. Fleet managers can use the sensor to monitor the tire pressure of their vehicles and ensure that they are properly inflated. This helps to improve fuel efficiency, reduce tire wear, and enhance vehicle safety. The sensor’s long service life and robust design minimize the need for frequent replacements, making it a cost-effective solution for fleet management.

5.6 Off-Roading and Motorsports

Off-roading and motorsports enthusiasts often require TPMS sensors that can withstand extreme conditions. The Autel MX-Sensor is designed to withstand harsh weather conditions and resist corrosion, making it a reliable choice for off-roading and motorsports applications. The sensor’s robust construction ensures that it can withstand the rigors of these activities.

5.7 Tire Pressure Monitoring in Trailers

The Autel MX-Sensor can also be used to monitor the tire pressure of trailers. This is particularly important for trailers that are used for hauling heavy loads. By monitoring the tire pressure, trailer owners can ensure that their tires are properly inflated, which improves safety and fuel efficiency.

5.8 Educational Purposes

The Autel MX-Sensor is a valuable tool for educational purposes. Automotive technology instructors can use the sensor to teach students about TPMS systems and how they work. The sensor’s ease of use and wide vehicle coverage make it an ideal choice for hands-on training.

6. Meeting Customer Needs with Autel 6937357202877 Dual Frequency MX-Sensor

Understanding and meeting customer needs is paramount in the automotive service industry. The Autel 6937357202877 Dual Frequency MX-Sensor, available at CARDIAGTECH.NET, addresses several key challenges faced by both automotive technicians and vehicle owners. By offering a reliable, versatile, and cost-effective TPMS solution, the Autel MX-Sensor can help you enhance customer satisfaction and build long-term relationships.

6.1 Addressing Customer Pain Points

High Cost of TPMS Repairs: Many customers are concerned about the high cost of TPMS repairs. The Autel MX-Sensor offers a cost-effective solution by reducing inventory requirements, minimizing installation time, and providing a durable, reliable product.
Inconvenience of TPMS Issues: TPMS issues can be inconvenient for customers, especially when they trigger warning lights on the dashboard. The Autel MX-Sensor’s ease of programming and installation helps to minimize downtime and get customers back on the road quickly.
Lack of Trust in Repair Shops: Some customers are hesitant to trust repair shops due to concerns about overcharging or unnecessary repairs. By offering a transparent and reliable TPMS solution, you can build trust with your customers and demonstrate your commitment to providing quality service.
Confusion about TPMS Technology: Many customers are unfamiliar with TPMS technology and how it works. By taking the time to explain the benefits of TPMS and the features of the Autel MX-Sensor, you can help customers make informed decisions about their vehicle maintenance.

6.2 Meeting Customer Expectations

Reliable Performance: Customers expect their TPMS sensors to provide accurate and reliable tire pressure monitoring. The Autel MX-Sensor is built to meet or exceed OEM sensor standards, ensuring that it delivers consistent and dependable performance.
Long Service Life: Customers want TPMS sensors that will last for a long time without needing to be replaced. The Autel MX-Sensor is equipped with an automotive-grade battery that provides a long service life of over 5 years.
Ease of Use: Customers appreciate TPMS solutions that are easy to use and understand. The Autel MX-Sensor’s wireless programmability and 100% clone-ability make it a user-friendly option for both technicians and vehicle owners.
Cost-Effectiveness: Customers are looking for TPMS solutions that offer the best value for their money. The Autel MX-Sensor’s reduced inventory requirements, minimized installation time, and long service life make it a cost-effective choice for TPMS repairs.

6.3 Enhancing Customer Satisfaction

Provide Clear Explanations: Take the time to explain the benefits of TPMS and the features of the Autel MX-Sensor to your customers.
Offer Competitive Pricing: Price your TPMS services competitively to attract customers and demonstrate your commitment to providing value.
Provide Fast and Efficient Service: Minimize downtime by programming and installing the Autel MX-Sensor quickly and efficiently.
Follow Up with Customers: After completing a TPMS repair, follow up with your customers to ensure that they are satisfied with the service.
Offer a Warranty: Provide a warranty on your TPMS repairs to give customers peace of mind and demonstrate your confidence in the quality of your work.

7. SEO Optimization for Autel 6937357202877 Dual Frequency MX-Sensor

To maximize the visibility of the Autel 6937357202877 Dual Frequency MX-Sensor on search engines, it’s essential to implement a comprehensive SEO strategy. This involves optimizing your website content, building backlinks, and monitoring your search engine rankings. By following these SEO best practices, you can attract more organic traffic to your website and increase sales of the Autel MX-Sensor.

7.1 Keyword Research

The first step in SEO optimization is keyword research. Identify the keywords that your target audience is using to search for TPMS sensors and related products. Some potential keywords for the Autel MX-Sensor include:

Autel MX-Sensor
Dual Frequency TPMS Sensor
Universal TPMS Sensor
Programmable TPMS Sensor
TPMS Sensor Replacement
315MHz TPMS Sensor
433MHz TPMS Sensor

7.2 On-Page Optimization

On-page optimization involves optimizing your website content to make it more search engine friendly. Some on-page optimization techniques for the Autel MX-Sensor include:

Use Keywords in Title Tags: Include your target keywords in the title tags of your web pages.
Use Keywords in Meta Descriptions: Write compelling meta descriptions that include your target keywords and encourage users to click through to your website.
Use Keywords in Header Tags: Use header tags (H1, H2, H3, etc.) to structure your content and include your target keywords.
Use Keywords in Body Copy: Use your target keywords naturally throughout your body copy.
Optimize Images: Use descriptive alt tags for your images and compress your images to improve page load speed.
Use Internal Links: Link to other relevant pages on your website to improve navigation and distribute link equity.

7.3 Off-Page Optimization

Off-page optimization involves building backlinks to your website from other reputable websites. Some off-page optimization techniques for the Autel MX-Sensor include:

Guest Blogging: Write guest posts for other websites in the automotive industry and include a link back to your website.
Link Building: Reach out to other websites in the automotive industry and ask them to link to your website.
Social Media Marketing: Share your website content on social media platforms to increase its visibility and attract backlinks.
Online Directories: List your website in online directories to increase its visibility and attract backlinks.

7.4 Technical SEO

Technical SEO involves optimizing your website’s technical aspects to make it more search engine friendly. Some technical SEO techniques for the Autel MX-Sensor include:

Improve Page Load Speed: Optimize your website’s code and images to improve page load speed.
Use a Mobile-Friendly Design: Ensure that your website is mobile-friendly to provide a good user experience on mobile devices.
Use HTTPS: Use HTTPS to encrypt your website and protect user data.
Use a Sitemap: Create a sitemap to help search engines crawl and index your website.
Use Robots.txt: Use a robots.txt file to prevent search engines from crawling certain pages on your website.

8. Frequently Asked Questions (FAQs) About Autel 6937357202877 Dual Frequency MX-Sensor

To provide comprehensive information about the Autel 6937357202877 Dual Frequency MX-Sensor, available at CARDIAGTECH.NET, here are some frequently asked questions (FAQs) that address common concerns and queries. These FAQs will help you better understand the sensor’s features, benefits, and usage, enabling you to make an informed decision.

Q1: What is the Autel MX-Sensor?

The Autel MX-Sensor is a programmable universal TPMS (Tire Pressure Monitoring System) sensor that combines both 315MHz and 433MHz frequencies into one unit. It is designed to replace original equipment (OE) sensors in a wide range of vehicles, offering extensive vehicle coverage and simplifying inventory management for automotive technicians and repair shops.

Q2: What are the key features of the Autel MX-Sensor?

The key features of the Autel MX-Sensor include dual frequency functionality, programmability, wide vehicle coverage, user-friendly design, SAE tested and certified, clone-able sensor ID, high-precision air valve, automotive-grade battery, replaceable aluminum valve stem, and lightweight design.

Q3: How does the Autel MX-Sensor simplify inventory management?

By combining two frequencies (315MHz and 433MHz) into a single sensor, the Autel MX-Sensor reduces the number of sensors you need to keep in stock. This simplifies the ordering process, reduces storage space requirements, and minimizes the risk of running out of the right sensor for a particular vehicle.

Q4: What vehicles are compatible with the Autel MX-Sensor?

The Autel MX-Sensor is compatible with up to 98% of OE sensors and 90% of vehicles in North America, Europe, and Asia. This broad coverage ensures that a single sensor can service a wide range of vehicle makes and models.

Q5: How do I program the Autel MX-Sensor?

The Autel MX-Sensor can be programmed wirelessly using an Autel TPMS tool. You will need to select the vehicle make, model, and year from the tool’s menu, choose the appropriate programming method (Clone Sensor or Auto Create), and follow the on-screen instructions.

Q6: Can I program the Autel MX-Sensor after it has been mounted on the wheel?

Yes, the Autel MX-Sensor features wireless programmability, which allows you to program the sensor even after it has been mounted on the wheel.

Q7: Does the Autel MX-Sensor require a vehicle relearn procedure?

No, the Autel MX-Sensor is 100% clone-able, meaning it can replicate the original sensor ID without requiring a vehicle relearn procedure.

Q8: How long does the Autel MX-Sensor battery last?

The Autel MX-Sensor is equipped with an automotive-grade battery that provides a long service life of over 5 years.

Q9: What is the warranty on the Autel MX-Sensor?

Autel provides a 24-month or 24,000-mile warranty against manufacturing defects for the Autel MX-Sensor.

Q10: Where can I purchase the Autel MX-Sensor?

You can purchase the Autel 6937357202877 Dual Frequency MX-Sensor at CARDIAGTECH.NET.

9. Call to Action

Ready to enhance your automotive repair services with the Autel 6937357202877 Dual Frequency MX-Sensor? Don’t miss out on the opportunity to streamline your inventory, reduce costs, and improve customer satisfaction. Contact CARDIAGTECH.NET today to learn more about the Autel MX-Sensor and how it can benefit your business.

Address: 276 Reock St, City of Orange, NJ 07050, United States
WhatsApp: +1 (641) 206-8880
Website: CARDIAGTECH.NET

Our expert team at CARDIAGTECH.NET is ready to assist you with any questions and provide you with the best TPMS solutions tailored to your needs. Contact us now and take the first step towards optimizing your automotive services with the Autel MX-Sensor!