Registering a new battery in your Audi using VCDS can seem daunting. This guide clarifies the process, addressing common issues and providing solutions for successful Audi Vcds Battery registration. Many Audi owners using a HEX-NET interface and VCDS software find that Address 61 – Battery Regulation isn’t listed under installed addresses. This guide will help you navigate this common problem.
Troubleshooting Missing Address 61
Often, Address 61 isn’t visible in the initial list. While it might appear under the Drive train tab, attempting to access it directly often results in a timeout error within VCDS. This suggests that the battery regulation module is a slave to the CAN gateway, requiring a different approach for registration.
Battery Registration Process in VCDS
The Ross-Tech Wiki offers valuable insights into battery replacement procedures (http://wiki.ross-tech.com/wiki/index.php/Battery_Replacement). One method involves slightly modifying the new battery’s serial number in VCDS. This can be achieved by changing a single digit if your battery doesn’t have specific codes like the original factory battery. After entering the modified serial number, verify the values in Measuring Blocks 017, 018, 019, and 020. These blocks display crucial data like Amp-hours (Ah), Cold Cranking Amps (CCA), and reserve capacity. Expect variations if the new battery’s specifications differ from the original.
Adapting Battery Settings (Adaptation-10 or Long Adaptation)
The next step involves adjusting Adaptation-10 within the CAN gateway to fine-tune charging parameters. However, some Audi models may not have Adaptation-10. Instead, you might find “Long Adaptation-0A”. The options within Long Adaptation might differ from what’s typically shown in online tutorials. Understanding these differences is crucial for correctly inputting the new battery’s technical details, ensuring optimal charging and battery longevity.
The specific procedures for adjusting Long Adaptation values for your Audi model may vary. Consult the Ross-Tech Wiki or relevant online forums for detailed instructions based on your specific vehicle and VCDS version. Accurate battery registration ensures that your Audi’s charging system is properly configured for the new battery, maximizing its performance and lifespan. Always double-check your work and refer to official documentation for the most accurate information.
