Enabling features like automatic mirror folding on your Audi A1 can enhance convenience and safety. This guide provides step-by-step instructions on how to activate passenger mirror dipping in reverse using VCDS (Vag-Com Diagnostic System). We’ll also explore other popular VCDS modifications for the Audi A1.
Activating Passenger Mirror Dip on Reverse with VCDS
This modification allows the passenger side mirror to automatically dip down when reverse gear is engaged, providing a better view of the curb and aiding in parking maneuvers. Here’s how to enable it:
- Connect VCDS: Connect your VCDS cable to your Audi A1’s OBD-II port and launch the VCDS software on your laptop.
- Select Module: Navigate to [Select] -> [52 – Door Elect, Pass]. This selects the module responsible for the passenger door’s electronics.
- Access Coding: Go to [Coding – 07] -> [Long Coding Helper]. This opens the long coding helper, which allows you to modify individual bits within the module’s coding.
- Modify Byte 4: Within the Long Coding Helper, locate Byte 4.
- Activate Bits 2 and 3: Set Bits 2 and 3 to “on” or “checked”. These bits control the passenger mirror dipping functionality.
- Save Changes: Click [Do It!] to save the changes to the module’s coding.
After completing these steps, the passenger mirror should automatically dip when reverse gear is selected. It will return to its original position once the car exceeds 5 mph or is turned off. The mirror will also remember any adjustments made while dipped for future use.
Other VCDS Mods for Audi A1
Beyond mirror dipping, several other customizations can be achieved with VCDS on the Audi A1. Some popular options include:
Kerb Lighting
This feature uses the front fog light on the corresponding side to illuminate the curb when turning at low speeds with dipped beam headlights on.
- Module: [09-Cent. Elect.]
- Coding: [Coding – 07] -> [Long Coding Helper] -> Byte 14, enable Bit 7
Audible Lock Confirmation
Enable a chirp from the alarm siren to confirm that the car is locked.
- Module: [09-Cent. Elect.]
- Coding: [Coding – 07] -> [Long Coding Helper] -> Byte 5, Set Bits 1 and 4 to “on”
Hidden Green Menu Access
Unlock access to the hidden green engineering menu within the MMI system.
- Module: [5F – Information Electr.]
- Adaptation: [Adaptation – 10] -> Channel 5, change value from 0 to 1, then Test and Save. Reboot MMI. Access by pressing and holding CAR and MENU buttons simultaneously.
Visual Parking Aid Activation
Enable the visual parking display on the MMI screen for vehicles equipped with only rear parking sensors.
- Module: [10 – Park Assist]
- Security Access: [Security – 16] -> Enter code 71679
- Coding: [Coding – 07] -> [Long Coding Helper] -> Byte 0, Bit 2-3: Check “08 Optical Active illustration active (BAP NEW)”
Conclusion
Using VCDS, Audi A1 owners can unlock hidden features and customize their vehicles to their preferences. While this guide focuses on activating the passenger mirror dip in reverse, it also highlights other potential modifications. Remember to proceed cautiously when using VCDS and always double-check coding instructions before implementing any changes. Incorrect coding could potentially lead to unexpected vehicle behavior.
