Posted inCardiagtech

A6 C7 VCDS Tweaks: Unlock Hidden Features And More

No Comments

The A6 C7 Vcds is a powerful tool for unlocking hidden potential in your Audi. With VCDS (Vag-Com Diagnostic System) and CARDIAGTECH.NET, you can customize your car’s features, diagnose issues, and even improve performance. This guide provides a comprehensive list of tweaks and modifications you can perform on your Audi A6 C7 using VCDS, maximizing your vehicle’s functionality. Discover how to personalize your driving experience with the help of CARDIAGTECH.NET!

1. Enabling Gauge Test/Needle Sweep

This feature adds a visual flair to your car by sweeping the speedometer and tachometer needles through their full range upon starting the engine. It’s a simple yet satisfying modification that enhances the startup experience.

How to Enable:

  1. Select [17 – Instruments]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Click on byte 1
  5. Check the option: “Gauge Test/Needle Sweep active”
  6. Select [Do It!]

2. Enabling Lap Timer

The lap timer function is designed for track enthusiasts, allowing you to record and monitor lap times directly from your instrument cluster. While some users report needing a firmware update for full functionality, it’s worth enabling to see if it works on your A6 C7.

How to Enable:

  1. Select [17 – Instruments]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Click on byte 1
  5. Check the option: “Lap Timer active”
  6. Select [Do It!]

3. Enabling Kerb Lighting

Kerb lighting enhances visibility during low-speed turns by activating the all-weather light on the side of the car corresponding to the direction of the turn. This feature is particularly useful for navigating tight corners in urban environments.

How to Enable:

  1. Select [09-Cent. Elect.]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Click on byte 4
  5. Enable bit 0
  6. Select [Do It!]

4. Enabling Beep on Lock

This tweak provides audible confirmation when the car is locked, using a brief chirp from the alarm siren. It’s a convenient way to ensure your car is securely locked without needing a visual check.

How to Enable:

  1. Select [46-Central Conv.]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Click on byte 1
  5. In bit 2, check the option: “Anti-Theft-System: Horn Confirmation active”
  6. Select [Do It!]

5. Enabling Hidden Menu (Green Menu)

The hidden menu provides access to advanced settings and diagnostic information within the MMI (Multi Media Interface). Exercise caution when navigating this menu, as incorrect modifications can lead to system malfunctions.

How to Enable:

  1. Select [5F – Information Electr.]
  2. Select [Adaptation – 10]
  3. Select Channel 6 and Read
  4. Change the value from 0 to 1
  5. Select Test then Save
  6. Reboot the MMI (Press MENU, central MMI knob, and top right softkey)

To access the Hidden Menu, press and hold the CAR and MENU buttons for a few seconds.

Warning: Be cautious when making changes in the hidden menu. Incorrect settings can cause issues.

6. Battery Meter Display

Displaying the battery meter in the MMI allows you to monitor your car’s battery voltage, providing an early warning system for potential battery issues.

How to Enable:

  1. Enter the Hidden Menu (see step 5)
  2. Select Car
  3. Select Carextdevicelist
  4. Check “Battery”
  5. Return
  6. Select Carmenuoperation
  7. Set “Battery” from 0 to 5
  8. Return
  9. Press CAR to exit the hidden menu
  10. Reboot the MMI

7. Video In Motion (VIM)

Video In Motion allows DVD playback to continue even when the car is moving, bypassing the factory-imposed speed restriction. Use this feature responsibly and in accordance with local laws.

How to Enable:

  1. Select [5F-Information Electr.]
  2. Select [Advanced ID – 1A]
  3. Note the Serial Number
  4. Go to Enable VIM TV-playback using VCDS/VAG-COM in your Audi MMI | trick77.com
  5. Follow the link for MMI 3G
  6. Enter your serial number into the input field
  7. Note the personal login code and the alternative login code it returns
  8. Select [Security Access – 16]
  9. Enter your personal login code. Select [Do it!]
  10. If you receive a “code not valid” message, try the alternative code.
  11. Select [Adaptation – 10]
  12. Select channel 48
  13. Press read
  14. Set the value from 0 to 255
  15. Press test
  16. Press save
  17. Press “Done, Go Back”
  18. Close VCDS and reboot your MMI

8. Passenger Door Mirror Dip on Selecting Reverse

This feature automatically dips the passenger side mirror when reverse gear is engaged, providing a better view of the kerb and helping prevent wheel damage during parking maneuvers.

How to Enable:

  1. Select [52 – Door Elect, Pass]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Click on Byte 4 (5th one along from the left)
  5. Set Bit 2 to “on”
  6. Select [Do It!]

9. Disabling Seatbelt Reminder Chimes

Disable the seatbelt reminder chime for situations where wearing a seatbelt may not be necessary or practical, such as moving the car a short distance on private property.

How to Enable:

  1. Select [17 – Instruments]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Click on byte 0
  5. In bit 4, check the option: “Seat Belt Warning inactive”
  6. Select [Do It!]

10. Disabling Engine Stop When Opening Driver’s Door

Prevent the engine from automatically shutting off when the driver’s door is opened, which can be useful in certain situations.

How to Enable:

  1. Select [46 – Central Conv.]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Click on the red byte
  5. Change the binary code from 00000111 to 00001111
  6. Tab into the next bit box
  7. Close the long code helper
  8. Select [Do It!]

11. Enabling Default Distance Setting for Adaptive Cruise Control (ACC) in the MMI

Customize the default following distance for the adaptive cruise control system directly from the MMI, allowing for more personalized control over driving assistance features.

How to Enable:

  1. Select [13 – Auto Distance Regulation]
  2. Select [Adaptation – 10]
  3. Select channel 07
  4. Press read
  5. Set the value from 0 to 1
  6. Press test
  7. Press save
  8. Press “Done, Go Back”
  9. Reboot your MMI

12. Modifying the High Beam Assist Speed Threshold

Adjust the speed threshold at which the high beam assist system activates, tailoring the system’s behavior to your specific driving conditions and preferences.

How to Enable:

  1. Select [20 – High Beam Assist]
  2. Select [Adaptation – 10]
  3. From the drop-down menu, select “High Beam Speed Threshold”
  4. Enter the speed to set the threshold to in KM/h
  5. Press save
  6. Press “Done, Go Back”
  7. Reboot your MMI

13. Enabling Daytime Running Lights (DRL) On/Off Setting in the MMI

Add the ability to control the daytime running lights directly from the MMI, allowing you to easily turn them on or off as needed.

How to Enable:

  1. Select [09-Cent. Elect.]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Click on byte 3
  5. Enable bit 0 (Daytime running lights adjustable via MMI)
  6. Select [Do It!]

14. Enabling Tourist Mode Setting for Headlights in the MMI

Activate the tourist mode setting for the headlights, which adjusts the beam pattern for driving on the opposite side of the road when traveling in countries with different traffic laws.

How to Enable:

  1. Select [09-Cent. Elect.]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Click on byte 4
  5. Enable bit 6
  6. Select [Do It!]

15. Enable Auto Handbrake When Shifting Into Park (P)

Automatically engage the electronic parking brake when the car is shifted into Park, adding an extra layer of security.

How to Enable:

  1. Select [53 – Parking Brake]
  2. Select [Security Access – 16]
  3. Enter code 78713
  4. Select [Adaption – 10]
  5. Select “Shift P to EPB”
  6. Set to Activated
  7. Select [Do It!]

16. Close Electric Boot Lid From Key Fob

Enable the ability to close the electric boot lid using the key fob, adding convenience to your daily routine.

How to Enable:

  1. Select [46 – Cent Conv]
  2. Select [Coding – 07]
  3. Click on byte 2, bit 2
  4. Tick Comfort operation: Remote control active
  5. Select [Do It!]
  6. Select [4D – Trunk Elec]
  7. Select [Security Access – 16]
  8. Input 12345
  9. Select [Adaption – 10]
  10. Activation using rear lid opening button in remote key – Touch function for closing
  11. Change to ACTIVE
  12. Select [Do It!]

17. Enable Double Disarm Chirp

Provide an audible confirmation when the alarm is disarmed, similar to the lock confirmation chirp.

How to Enable:

  1. Select [46 – Central Conv.]
  2. Select [Adaption – 10]
  3. Channel 63
  4. Add 4
  5. Select [Do It!]

18. Disable DRL Dim on Turn Signal

Prevent the daytime running lights from dimming on the side of the active turn signal, maintaining consistent brightness and visibility.

How to Enable:

  1. Select [09 – Central Elec.]
  2. Select [Security Access – 16]
  3. Code: 20113
  4. Select [Adaption – 10]
  5. Channel 3
  6. Set between 5 and 100 (50 is a good setting)
  7. Select [Do It!]

19. Parking Brake Release Without Seat Belt

Allow the parking brake to be released even when the seatbelt is not fastened, providing more flexibility in certain parking situations.

How to Enable:

  1. Select [53 – Parking Brake]
  2. Select [Security Access – 16]
  3. Code presented by program
  4. Select [Adaption – 10]
  5. Select from drop down menu
  6. Change parameter
  7. Select [Do It!]

20. Tail Lights On With Front DRLs

Activate the tail lights to illuminate whenever the front daytime running lights are active, enhancing visibility and aesthetics.

How to Enable:

  1. Select [09-Cent. Elect.]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Click on byte 2
  5. Enable bit 7
  6. Select [Do It!]

21. Enable Ripping From CD to MMI HDD

Enable the function to rip music from CDs directly to the MMI’s hard drive, allowing for convenient storage and playback of your favorite music.

How to Enable:

  1. Enter the Hidden Menu (see step 5)
  2. Select Main
  3. Select Diagnose
  4. Select Settings
  5. Select Import_Multimedia
  6. Check “Ripping”
  7. Return
  8. Press CAR to exit the hidden menu
  9. Reboot the MMI

22. Disable NAV & Phone Warning Messages While Entering Data at Speed

Disable the warning messages that appear when entering navigation or phone data while the car is in motion, allowing passengers to input information without interruption.

How to Enable:

  1. Select [5F – Information Electr.]
  2. Select Adaptation
  3. Set channel 2 & 3 to 250

23. Enable Adaptive Brake Lights

Activate the adaptive brake lights, which flash during hard braking to alert following drivers of a sudden stop.

How to Enable:

  1. Select [46 – Comfort System]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Byte 8
  5. Bit 0 – Emergency Brake Flashing via Turn Lights active (1 = active)
  6. Bit 1 – Emergency Brake Flashing via Brake Lights active (1 = active)

24. Enable Independent Fog Lights Control With High Beams

Allow the fog lights to remain illuminated even when the high beams are activated, providing maximum visibility in foggy conditions.

How to Enable:

  1. Select [09 – Cent. Elect.]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Byte 4
  5. Bit 1 – (Front) Uncheck the box or change :Bit 1 to 0
  6. Bit 2 – (Rear) Uncheck the box or change :Bit 2 to 0

25. Enable TPMS (Tire Pressure Monitoring System)

Activate the tire pressure monitoring system (TPMS) if your car is equipped with the necessary hardware.

Note: You need the 1AT ABS unit (check your stickers; 1AS does not work).

How to Enable:

  1. [Hidden menu]
  2. [car]
  3. [cardevicelist]
  4. [RDK] Enable
  5. [Hidden menu]
  6. [car]
  7. [carmenuoperation]
  8. [Tires Air Pressure Control]
  9. Set to 5
  10. Select [03 – ABS Brakes]
  11. Select [Security Access – 16] (login code: 61378)
  12. Select [Coding – 07]
  13. Choose [Long Coding Helper]
  14. Byte 1
  15. Bit 3 – Tire Pressure Monitoring (PR-7K6) active (1 = active)
  16. Enable TPMS in the Instrument Cluster:
  17. Select [17 – Instruments]
  18. Select [Coding – 07]
  19. Choose [Long Coding Helper]
  20. Byte 4
  21. Bit 0 – Tire Pressure Monitoring (TPMS) installed (1 = active)
  22. Reset MMI

26. Set Audi Parking System – Switch OFF Speed

Adjust the speed at which the Audi parking system switches off, tailoring the system to your preferred parking style.

How to Enable:

  1. Select [10 – Park/Steer Assist]
  2. Select [Adaptation – 10]
  3. Channel 23
  4. Set to 20 (max value in km/h)

27. Adjust LED Brightness

Fine-tune the brightness of the LED lights, achieving the perfect balance between aesthetics and visibility.

How to Enable:

  1. Select [09 – Cent. Elect.]
  2. Select [Security Access – 16] (enter security code 20113)
  3. Select [Adaptation – 10]
  4. Channel 3
  5. Set between 5 and 100

28. Adjust Bluetooth Microphone Sensitivity

Optimize the sensitivity of the Bluetooth microphone for clearer phone calls.

How to Enable:

  1. Hidden menu
  2. Diagnose
  3. Settings
  4. Mic sensiblity – choose -6db/0db/+6db

29. Enable Drivers Memory Seat

Enable the driver’s seat memory function, allowing you to save and recall your preferred seating positions.

How to Enable:

  1. Select 36: Seat Mem
  2. Select 07 Coding
  3. Choose Long Coding Helper
  4. Change Byte 2, bit 0, to 1
  5. In MMI, Seat Adjustment you can now find Driver’s seat, you can set Key memory on/off. Set it “on” for both keys separately.

30. Disable/Memorize/Invert Start & Stop

Customize the behavior of the Start & Stop system, disabling it entirely, memorizing its last state, or inverting the button logic.

How to Enable:

  1. Module 09-Cent. Elec.
  2. Enter Security Code (20113)
  3. Adaptation on Channel 34:
    • Subtract 4 to the value –> Start&Stop always disabled
    • Add 32 to the value –> memorize last status
  4. Add 64 to the value to reverse the Start & Stop button light
  5. Test & save

31. Activation of Footwell Lighting for Vehicles Without Lighting Pack/Ambient Lighting

Activate footwell lighting for vehicles that didn’t come with a lighting package.

How to Enable:

  1. Select [09-Cent. Elect]
  2. Select [Coding – 07]
  3. Choose [Long Coding Helper]
  4. Click on byte 16
  5. Enable bit 6
  6. Select [Do It!]
  7. Enter the Hidden Menu (see step 5)
  8. Select Car
  9. Select Cardevicelist
  10. Check “Interior Light”
  11. Return
  12. Select Carmenuoperation
  13. Set “Interior Light” from 0 to 5
  14. Return
  15. Press CAR to exit the hidden menu
  16. Reboot the MMI

Lowering AAS (Adaptive Air Suspension) With VCDS

Adjust the ride height of your Audi A6 C7 equipped with adaptive air suspension using VCDS. This procedure allows you to lower the car for a sportier stance or raise it for improved ground clearance.

Important Considerations:

  • Level Ground: Ensure the car is on level ground for accurate adjustments.
  • Auto Mode: Set the car to “Auto” mode.
  • Doors Closed: Keep all doors closed during the procedure to avoid interruptions.
  • Towing/Tire Changing Mode: Make sure the car is NOT in towing or tire changing mode.
  • Maximum Drop: Audi-approved drop is 17mm. Exceeding this can affect other systems.

Step-by-Step Guide:

  1. Access Level Control:
    • Load up VCDS.
    • Go to Module 34 – Level Control.
  2. Note Existing Values:
    • Go to “10 – Adaptation”.
    • Take note of the four values titled “Body height front left wheel house edge”.
  3. Calculate New Values:
    • Add your desired drop in millimeters (mm) to each of the values noted.
  4. Security Access:
  5. Verify Security Code:
    • You should receive a message stating that the security code has been accepted. If not, stop and recheck the code.
  6. Basic Settings:
    • Go to “04 – Basic Settings”.
    • IMPORTANT: DO NOT select “Reset All Adaptations”.
  7. Activate Level Control:
    • Select “Activate Level Control”.
    • Hit “Go” and wait for it to complete.
  8. Delete Calibration:
    • Select “Delete Calibration For Level Control”.
    • Hit “Go” and wait for it to complete.
    • A fault code and error message (“Air Suspension Malfunction”) are normal at this stage.
  9. Start Up to Reference Level:
    • Select “Start Up to Reference Level”.
    • Hit “Go”. This step will take about a minute, and the car will move up and down.
    • Wait for it to complete. DO NOT use the “start up to reference level production” option.
  10. Adaptation:
    • Select “Go Back” and go to “10 – Adaptation” on the previous screen.
  11. Enter New Values:
    • Enter new adaptation values for all four wheels: “Body height front left wheel house edge”, enter the new adaptation value, and hit “Do it”.
    • Repeat for the other three wheels in the order FL, RL, FR, RR.
  12. Calibrate Level Control:
    • After entering values for all four wheels, select “Go Back” and return to “04 – Basic Settings” again.
    • In basic settings, select “Calibrate Level Control” and hit go.
    • Wait for it to say “not running”.
  13. Activate Level Control:
    • Select “Activate Level Control”, hit “Go”.
  14. Fault Codes:
    • Go to “02 – Fault Codes” and Reset codes.

Prevent Auto-Lowering and Allow Raising at Any Speed

Prevent the car from auto-lowering at ~30 mph and allow raising the suspension while driving at any speed.

  1. Launch the green menu by holding Car + Menu buttons.
  2. Go to “car” then “carmenuoperation” menu.
  3. Scroll down to “suspension”.
  4. Change the value to “5”.
  5. Press the center menu knob to save.
  6. Reboot the MMI (Menu button +Center knob+Top Right soft button).
  7. Turn the ignition on/off.

Why Choose CARDIAGTECH.NET for Your VCDS Needs?

At CARDIAGTECH.NET, we understand the passion and dedication that goes into maintaining and modifying your Audi A6 C7. That’s why we offer a comprehensive range of diagnostic tools and equipment to help you unlock your car’s full potential. Here’s why CARDIAGTECH.NET stands out as the premier choice for automotive enthusiasts and professionals alike:

  • Expertise and Guidance: Our team of experienced technicians and automotive specialists are dedicated to providing you with the knowledge and support you need to successfully perform VCDS tweaks and modifications. We offer detailed guides, troubleshooting tips, and personalized assistance to ensure you get the most out of your diagnostic tools.

  • Quality Products: We source our diagnostic tools from leading manufacturers, ensuring that you receive reliable, accurate, and high-performance equipment. Our products are rigorously tested to meet the demands of both DIY enthusiasts and professional mechanics.

  • Customer Satisfaction: At CARDIAGTECH.NET, customer satisfaction is our top priority. We strive to provide an exceptional shopping experience, from easy online ordering to prompt and helpful customer service. We’re here to answer your questions, address your concerns, and ensure that you’re completely satisfied with your purchase.

  • Comprehensive Solutions: Whether you’re looking to enable hidden features, diagnose engine issues, or customize your car’s performance, CARDIAGTECH.NET has the tools and resources you need. We offer a wide range of diagnostic scanners, cables, software, and accessories to suit your specific needs and budget.

  • Cutting-Edge Technology: We stay up-to-date with the latest advancements in automotive technology to provide you with the most innovative and effective diagnostic tools available. Our products are designed to support a wide range of vehicle makes and models, ensuring compatibility and versatility.

  • Community Support: Join the CARDIAGTECH.NET community of automotive enthusiasts and professionals to share your knowledge, ask questions, and connect with like-minded individuals. Our online forum and social media channels provide a platform for collaboration and learning, ensuring that you’re always in the loop with the latest trends and techniques.

Table: VCDS Tweaks for Audi A6 C7

Feature Description
Gauge Test/Needle Sweep Sweeps speedo and rev counter needles on engine start.
Lap Timer Activates lap timer in instrument cluster.
Kerb Lighting Illuminates kerb when turning at low speeds.
Beep on Lock Chirps alarm siren briefly when locking the car.
Hidden Menu Enables access to the green engineering menu in the MMI.
Battery Meter Displays battery voltage in the MMI.
Video In Motion (VIM) Allows DVD playback while driving.
Passenger Door Mirror Dip on Reverse Dips passenger mirror when reverse is selected.
Disable Seatbelt Reminder Chimes Disables the seatbelt warning chime.
Disable Engine Stop on Door Open Prevents engine from stopping when the driver’s door is opened.
ACC Default Distance Setting Modifies the default distance setting for Adaptive Cruise Control.
High Beam Assist Speed Threshold Changes the speed at which High Beam Assist activates.
DRL On/Off Setting in MMI Adds option to turn DRLs on/off via the MMI.
Tourist Mode Setting for Headlights in MMI Adjusts headlight beam pattern for driving on the opposite side of the road.
Enable Auto Handbrake when Shift into P Automatically engages the parking brake when shifting into Park.
Close Electric Boot Lid from Key Fob Allows closing the electric boot lid using the key fob.
Enable Double Disarm Chirp Provides audible confirmation when the alarm is disarmed.
Disable DRL Dim on Turn Signal Prevents DRLs from dimming on the side of the active turn signal.
Parking Brake Release Without Seat Belt On Allows parking brake release without seat belt fastened.
Tail Lights On With Front DRLs Activates tail lights to illuminate with front DRLs.
Enable Ripping From CD to MMI HDD Allows ripping music from CDs directly to the MMI’s hard drive.
Disable NAV & Phone Warning Messages at Speed Disables warning messages when entering data while the car is in motion.
Enable Adaptive Brake Lights Activates adaptive brake lights that flash during hard braking.
Independent Fog Lights with High Beams Allows fog lights to remain on with high beams.
Enable TPMS Activates tire pressure monitoring system.
Audi Parking System Switch OFF Speed Adjusts the speed at which the parking system switches off.
Adjust LED Brightness Fine-tunes the brightness of the LED lights.
Adjust Bluetooth Microphone Sensitivity Optimizes the sensitivity of the Bluetooth microphone.
Enable Drivers Memory Seat Enables the driver’s seat memory function.
Disable/Memorize/Invert Start & Stop Customizes the behavior of the Start & Stop system.
Activate Footwell Lighting Activates footwell lighting for vehicles without a lighting package.
Lowering AAS with VCDS Adjust the ride height of your Audi A6 C7 equipped with adaptive air suspension using VCDS

Estimated Costs

Tool/Service Estimated Cost (USD)
VCDS Cable 200 – 500
Software License Included with cable
Professional Tuning Services 50 – 200 per tweak
Diagnostic Check-up 75 – 150

FAQ: A6 C7 VCDS Tweaks

  1. What is VCDS?

    VCDS (Vag-Com Diagnostic System) is a software and hardware package that allows you to diagnose, modify, and customize various settings in your Audi A6 C7. It provides access to control modules within the car, enabling you to perform tweaks and modifications beyond the factory settings.

  2. Is VCDS safe to use on my Audi A6 C7?

    When used correctly and with caution, VCDS is generally safe. However, it’s crucial to follow instructions carefully and avoid making changes you don’t fully understand. Incorrect modifications can lead to system malfunctions. It is always recommended to back up your car’s original settings before making any changes.

  3. Where can I purchase a VCDS cable and software?

    You can purchase a genuine VCDS cable and software directly from Ross-Tech or authorized resellers. Be wary of counterfeit products, as they may not function correctly and could potentially damage your car’s systems. You can also consult with CARDIAGTECH.NET for verified and reliable products.

  4. Can VCDS void my car’s warranty?

    Modifying your car’s settings with VCDS may void certain aspects of your warranty, particularly if the modifications directly cause a malfunction. It’s essential to understand the terms of your warranty and proceed with caution when making changes. Consult with your dealer for more clarity.

  5. Do I need any special skills or knowledge to use VCDS?

    While some basic computer skills are helpful, you don’t need to be an expert to use VCDS. However, it’s essential to research and understand the specific tweaks you’re attempting to perform. There are many online resources, forums, and communities where you can find guidance and support.

  6. Can VCDS be used to diagnose engine problems?

    Yes, VCDS is a powerful tool for diagnosing engine problems and other issues within your Audi A6 C7. It can read fault codes, display live data, and perform various diagnostic tests, helping you pinpoint the source of the problem.

  7. What is the Hidden Menu (Green Menu) and how do I access it?

    The Hidden Menu, also known as the Green Menu, is a hidden interface within the MMI system that provides access to advanced settings and diagnostic information. To access it, you typically need to press and hold the CAR and MENU buttons simultaneously for a few seconds. Be cautious when making changes in this menu, as incorrect settings can cause issues.

  8. What is Video In Motion (VIM) and is it legal?

    Video In Motion (VIM) is a tweak that allows DVD playback to continue even when the car is moving, bypassing the factory-imposed speed restriction. However, it’s essential to use this feature responsibly and in accordance with local laws, as watching videos while driving can be distracting and dangerous.

  9. Can I revert back to the original settings if I don’t like a particular tweak?

    Yes, it’s generally possible to revert back to the original settings if you don’t like a particular tweak. Before making any changes, VCDS typically allows you to save a backup of your car’s original settings. You can then use this backup to restore the original configuration if needed.

  10. Are there any risks associated with lowering my car using VCDS?

    Lowering your car using VCDS can affect various systems, such as cameras and adaptive cruise control. Also exceeding the Audi-approved drop of 17mm can lead to several issues. Always proceed with caution and research the potential impacts before making any adjustments.

Ready to unlock the hidden potential of your Audi A6 C7? Contact CARDIAGTECH.NET today for expert advice and the best VCDS tools available! Our knowledgeable team is ready to help you enhance your driving experience. Reach out now and let us assist you in achieving the ultimate customization for your vehicle.

Contact Information:

  • Address: 276 Reock St, City of Orange, NJ 07050, United States
  • WhatsApp: +1 (641) 206-8880
  • Website: CARDIAGTECH.NET

Comments

No comments yet. Why don’t you start the discussion?

Leave a Reply

Your email address will not be published. Required fields are marked *