Connecting your iPhone to your BMW for coding can be frustrating. Many struggle to establish a reliable connection using a Lightning to Ethernet adapter. This guide provides a step-by-step solution using an affordable OBDII PC cable and a readily available Ethernet adapter, helping you find the Lowest Price Obdii Pc Cable option for successful BMW coding.
This guide was developed and tested using an iPhone 12 Pro running the latest iOS, a generic Lightning to RJ45 Ethernet adapter, a standard ENET cable, and the BimmerCode app. While specific products aren’t endorsed, this setup demonstrates that achieving a connection is possible with budget-friendly components, emphasizing the potential for finding the lowest price OBDII PC cable setup.
Connecting Your iPhone to Your BMW for Coding
Before starting, ensure your car is parked safely and the ignition is in the auxiliary position (allowing electronics to function without starting the engine). This allows the car’s systems to power up and communicate with the coding app via the OBDII port using the lowest price OBDII PC cable you can find.
iPhone Setup:
- Disable Network Connections: On your iPhone, temporarily disable Cellular, Wi-Fi, and Bluetooth. This crucial step forces the phone to prioritize the wired Ethernet connection. It’s important to wait approximately 30 seconds after disabling these services to allow the iPhone to fully disconnect. This ensures that the phone will correctly recognize the Ethernet connection provided by the lowest price OBDII PC cable and adapter.
- Connect the Hardware: Connect the ENET cable to the OBDII port in your BMW. Then, connect the RJ45 end of the Ethernet adapter to the ENET cable. Finally, plug the Lightning connector into your iPhone.
- Verify Ethernet Connection: Navigate to Settings on your iPhone. Between “Bluetooth” and “Wi-Fi,” an “Ethernet” option should appear. If it doesn’t, try disconnecting and reconnecting the Lightning adapter. Select “Ethernet” then tap “USB 10/100 LAN”. Renew the lease by tapping “Renew Lease” and confirming on the pop-up. This confirms the connection between your phone and the lowest price OBDII PC cable.
BimmerCode Setup:
- Initial BimmerCode Configuration: Open the BimmerCode app. Do not immediately attempt to connect. Go to the app settings (gear icon in the bottom right).
- Adapter Selection Trick: Temporarily select an adapter type that you do not have connected. This forces a connection error, which seems to reset the app’s connection settings. Then return to settings and select “ENET Cable” as the adapter type. This workaround ensures BimmerCode correctly recognizes the lowest price OBDII PC cable setup.
- Connect to Your BMW: Return to the main BimmerCode screen and tap “Connect.” The app should now successfully connect, prompting you to select your vehicle’s model and type.
Conclusion
By following these steps, you can bypass common connectivity issues and successfully code your BMW using an iPhone and a potentially lowest price OBDII PC cable setup. Remember to prioritize a stable connection and patience throughout the process. The frustration of initial setup is easily overcome by the rewards of customizing your BMW to your preferences.